quattroworld.com Forums: ^^^Have to agree, at least based on 2.7T experience. Others have done it though.

All messages | Search Forums | Return to D2 A8/S8 (1997 - 2003)

^^^Have to agree, at least based on 2.7T experience. Others have done it though.
Posted by: TwoSeven (3728) on 2016-01-30 11:29:06 In Reply to: I'd be afraid of any Allroad part "contaminating" the D2 ... I don't want my wife even parking > posted by silverd2 on 2016-01-30 09:15:09	Share \| Report

Thread:

Can any of you 6spd'ers explain this?? - Travieso 2016-01-27 13:58:24 (748 views)
- Is Scotty wrong?...Post #3... - Travieso 2016-01-29 15:33:45 (540 views)
- Thanks for the additional info everyone, but.... - Travieso 2016-01-27 19:11:22 (578 views)
  - He is on the URS4/6 Forums. He posts there regularly. - DonaldS4 2016-01-30 06:44:56 (489 views)
  - I am not sure that he used the 01E. If you use the 01E from the B5 S4 you need a 12mm spacer. - TozoM8 2016-01-29 13:19:03 (460 views)
    - He used a 5spd 01E out of a URS6 - Travieso 2016-01-29 15:16:51 (483 views)
      - If every part you use is Euro stock, you should be fine. - TwoSeven 2016-01-29 15:36:10 (434 views)
- The spacer is actually 12mm think. - TozoM8 2016-01-27 18:25:30 (553 views)
  - The spacer is actually 11.2mm thick according to the original part lists, FYI. - TwoSeven 2016-02-04 13:05:38 (419 views)
  - Got it....but... - Travieso 2016-01-27 18:45:19 (532 views)
    - and to confuse you more:) - TozoM8 2016-01-31 13:36:15 (466 views)
    - the pilot bearing bottoms out w/o a spacer for the trans - fn_42 2016-01-27 21:20:20 (515 views)
      - bingo! - The Scrambler 2016-01-28 10:37:00 (436 views)
- b5 s4 dual mass flywheel with shim between crank and flywheel (roughly 2 mm) and the... - The Scrambler 2016-01-27 14:48:25 (758 views)
  - I realize I need the 1.25mm shim PN 035 105 303... - Travieso 2016-01-27 16:21:43 (523 views)
    - Maybe this isn't unorthodox(?), but he also used an old CV outer race as a spacer for the.. - silverd2 2016-01-27 16:55:23 (397 views) (Deleted)
      - I'm doing the same but with a custom spacer. The only OEM axle assembly that fits...  -  TwoSeven  2016-01-28 13:07:21 (419 views)
        
        Seems to me like I'd use another trans to go RWD  -  hyperlogos  2016-02-04 07:55:37 (306 views)
        
        to convert to rwd, you need the outer bits of the front cv's bolted through the hub and wheel bearin  -  The Scrambler  2016-01-28 14:25:11 (409 views)
        
        My concern over the rear diff has more to do with whether it can handle 100% of the torque  -  TwoSeven  2016-01-28 15:48:54 (319 views)
        
        are you going to run a d2 s8 rear diff? and are they factory LSD? if not, thats an issue   -  The Scrambler  2016-01-28 16:36:09 (590 views)
        
        Haven't made the call either way - just realizing that the D2 probably isn't going to be...  -  TwoSeven  2016-01-28 23:12:00 (394 views)
        
        RWD? you nut, just alter the bias of the center diff...   -  BrianC72gt  2016-01-29 00:12:49 (504 views)
        
        I see your point, but that doesn't add lightness, nor does it free up the steering feel.  -  TwoSeven  2016-01-29 12:14:00 (353 views)
        
        I think it would suck out loud ... AWD "no advantage" going forward ("traction")!? >>  -  silverd2  2016-01-29 12:55:49 (335 views) (Deleted)
        
        I wonder how hard it would be to put an Allroad 6mt drive line in a D2  -  CalG  2016-01-29 17:55:14 (320 views)
        
        I'd be afraid of any Allroad part "contaminating" the D2 ... I don't want my wife even parking >  -  silverd2  2016-01-30 09:15:09 (332 views) (Deleted)
        
        ^^^Have to agree, at least based on 2.7T experience. Others have done it though.   -  TwoSeven  2016-01-30 11:29:06 (342 views)
        
        To each their own, but having owned 3 manual MB S-class sedans, I respectfully disagree.  -  TwoSeven  2016-01-29 13:59:59 (332 views)
      - haha thats exactly what i did! 2 urs6/4 front right cv shafts and machine a spacer from a spare inne - The Scrambler 2016-01-28 10:35:06 (385 views)
        
        1 side should bolt up the other needs a 1" ish spacer - The Scrambler 2016-01-28 10:35:47 (338 views)
      - Haha...Unorthodox is a brand name.... - Travieso 2016-01-27 17:17:47 (402 views)

You must be registered and logged in to post. Please select an option:

All messages | Search Forums | Return to D2 A8/S8 (1997 - 2003)

Copyright © VerticalScope Inc. All rights reserved.

quattroworld.com is an independent Audi enthusiast website owned and operated by VerticalScope Inc. Content on quattroworld.com is generated by its users. quattroworld.com is not in any way affiliated with Audi AG.