quattroworld.com Forums: diablo bit: Diablo 1-1/2 in. High-Speed Steel Forstner Bit

diablo bit: Diablo 1-1/2 in. High-Speed Steel Forstner Bit
Posted by: ModifiedA4 (128) on 2017-03-01 07:43:18 In Reply to: What is the best drill bit to use for cutting 1-1/2" through hole in wood with a cordless drill? posted by JustMtnB44 on 2017-02-28 10:41:27	Share \| Report

Thread:

What is the best drill bit to use for cutting 1-1/2" through hole in wood with a cordless drill? - JustMtnB44 2017-02-28 10:41:27 (271 views)
- You need a long auger to keep the hole straight - Fusilier 2017-03-01 09:47:25 (217 views)
- that irwin self feed bit, or forstner style will work best, just make sure you get one with a hex.. - pilot345 2017-03-01 08:59:19 (215 views)
  - this is the type I use for holes in logs/beams for pipes/wires etc.. like forstner, but more... - pilot345 2017-03-01 23:46:56 (201 views)
- diablo bit: Diablo 1-1/2 in. High-Speed Steel Forstner Bit - ModifiedA4 2017-03-01 07:43:18 (210 views)
- I would use a decent jigsaw with Festool seven-inch blades although you mention at least four-inches - freakness 2017-03-01 00:28:39 (331 views)
- I would use an auger bit. - RKA 2017-02-28 11:17:02 (370 views)
  - As would I - gription 2017-02-28 11:27:27 (232 views)
    - I agree, I've used the ship auger bits for 3/8" and 1/2" holes up to 12" deep - JustMtnB44 2017-02-28 11:35:48 (216 views)
      - You could try an extension on the Speedbore bits. It's not the best solution, but - gription 2017-02-28 12:02:40 (277 views)
      - Can you rent a larger drill for the job? They are pretty cheap for rental.  -  RKA  2017-02-28 12:00:15 (206 views)
        
        I can't as this will be in a remote area without power, so must be cordless.   -  JustMtnB44  2017-02-28 14:23:06 (238 views)
        
        Or a portable generator   -  gription  2017-02-28 15:06:30 (209 views)
- How deep? - gription 2017-02-28 10:55:05 (300 views)
  - at least 4" deep, Makita 18v drill and/or impact driver. - JustMtnB44 2017-02-28 10:59:22 (215 views)
    - Get a couple of these - gription 2017-02-28 11:18:21 (333 views)
      - This is what I was originally planning on, but then came across the other options. - JustMtnB44 2017-02-28 11:38:08 (224 views)
        
        I have the Bosch ones also - gription 2017-02-28 12:06:39 (237 views)
    - Is it a blind hole, or will it go 'right through'? - TyloPuP.. katMAN 2017-02-28 11:02:49 (226 views)
      - not blind, all the way through at least 4", up to 8". - JustMtnB44 2017-02-28 11:14:04 (220 views)
        
        If up to 8", then a ship auger is your best bet, but you may not have enough drill - gription 2017-02-28 11:25:27 (207 views)
- Hole saw - Coloradomark 2017-02-28 10:44:23 (227 views)
  - not enough cutting depth for this application. - JustMtnB44 2017-02-28 11:01:58 (213 views)
    - What are you building anyway ? - Pelican Pete 2017-02-28 14:27:00 (236 views)
      - Basically just staking logs and timbers into the ground so they cannot be moved.   -  JustMtnB44  2017-02-28 19:42:31 (215 views)
        
        are you staking with   -  D4AeighT  2017-03-01 10:12:08 (257 views)
        
        12/8 would've some serious rebar.   -  30V-6  2017-03-01 14:55:52 (167 views)
        
        No, wooden stakes which is why the hole is so large.   -  JustMtnB44  2017-03-01 15:17:06 (173 views)
        
        got it, I'm securing some railroad ties in place...  -  D4AeighT  2017-03-01 15:27:26 (178 views)
        
        I like the clean look of through holes. In my case I want the stakes to rot away with the logs.  -  JustMtnB44  2017-03-01 21:00:02 (203 views)

You must be registered and logged in to post. Please select an option:

Copyright © VerticalScope Inc. All rights reserved.

quattroworld.com is an independent Audi enthusiast website owned and operated by VerticalScope Inc. Content on quattroworld.com is generated by its users. quattroworld.com is not in any way affiliated with Audi AG.