quattroworld.com Forums: if you must...at least remove all hardware...except hinges of course.

All messages | Search Forums | Return to Architecture & Design/Construction/DIY

if you must...at least remove all hardware...except hinges of course.
Posted by: Rick601 (2721) on 2018-02-22 12:44:43 In Reply to: I like this - it's just 3 doors. I'd rather not have to remove them because they are really heavy posted by TheLex on 2018-02-21 14:07:58	Share \| Report

Thread:

repainting interior doors - our doors had been previously painted white with a sprayer - TheLex 2018-02-19 23:50:20 (254 views)
- I would say depends on how many. Just a few, and I would roll/brush. A lot, and its worth the.. - pilot345 2018-02-21 02:04:04 (198 views)
  - I like this - it's just 3 doors. I'd rather not have to remove them because they are really heavy - TheLex 2018-02-21 14:07:58 (165 views)
    - if you must...at least remove all hardware...except hinges of course. - Rick601 2018-02-22 12:44:43 (163 views)
      - oh for sure, I hate i when the hardware isn't removed and paint gets on it - TheLex 2018-02-22 17:15:45 (137 views)
- Sprayer but even the right type of roller would be better than a brush on that. - Pablo 2018-02-20 10:22:29 (157 views)
  - If I may... there are situations where brush marks are "correct" for example> - Rick601 2018-02-20 16:07:08 (185 views)
    - Well ours is mid-century modern so I guess - TheLex 2018-02-20 16:58:46 (200 views)
      - You gotta stay fit in retirement!   -  oc  2018-02-20 17:39:17 (152 views)
        
        go to put the door back, left the pins in the hinges, put the door down take out the pins>>  -  Rick601  2018-02-20 17:53:49 (196 views)
        
        lol my aching back already aches just reading that!!!   -  TheLex  2018-02-20 22:10:20 (157 views)
      - You'll be glad you did it right! or not! priorities! - Rick601 2018-02-20 17:35:55 (149 views)
  - Sprayer - if it's set-up right. Otherwise a high quality short-nap roller. - gription 2018-02-20 11:05:15 (152 views)
    - There are newer microfiber and other types of rollers too. - Pablo 2018-02-20 12:03:57 (201 views)
      - I have the worst luck using a roller on a door, always end yo using a brush.  -  Raistlin  2018-02-20 19:00:39 (180 views)
        
        Lay it flat   -  gription  2018-02-20 20:28:42 (204 views)
        
        *mind blown*   -  ModifiedA4  2018-02-21 20:05:49 (194 views)
        
        one side of the door is white and the other will be blue so I'd have to mask it off well when  -  TheLex  2018-02-20 22:14:16 (152 views)
        
        Make sure you use the same type of paint with the same number of coats on each side.   -  gription  2018-02-21 11:45:01 (144 views)
        
        one side is white and painted already - the other side will be a medium blue   -  TheLex  2018-02-21 14:08:33 (141 views)
        
        Pigment is not the issue, paint type and number of coats is  -  gription  2018-02-21 17:03:35 (169 views)
        
        ugh now my head hurts - so you're saying that since there's already sprayed on white on both sides  -  TheLex  2018-02-21 22:30:10 (179 views)
        
        Yes - exactly  -  gription  2018-02-22 11:33:30 (163 views)
        
        I am guilty of that, but one door was exterior and I didn't want to remove it.  -  Raistlin  2018-02-20 20:42:28 (168 views)
- Sprayer all the way - properly thinned, and with proper tip on the gun. - Grapeking 2018-02-20 09:27:34 (192 views)
- Ugh, skip on the brush! Do it right with the sprayer. - 5speed6 2018-02-20 00:26:43 (230 views)

You must be registered and logged in to post. Please select an option:

All messages | Search Forums | Return to Architecture & Design/Construction/DIY

Copyright © VerticalScope Inc. All rights reserved.

quattroworld.com is an independent Audi enthusiast website owned and operated by VerticalScope Inc. Content on quattroworld.com is generated by its users. quattroworld.com is not in any way affiliated with Audi AG.