quattroworld.com Forums: When the engine is running proper, pull the dip stick and it will stall. The same for the oil filler

All messages | Search Forums | Return to UrQ/Sport/Coupe

When the engine is running proper, pull the dip stick and it will stall. The same for the oil filler
Posted by: wego0001 (68106) on 2017-04-26 10:34:21 In Reply to: Vac lines seem older, but chemtool says they are OK. Oil dipstick.. posted by Pre95 on 2017-04-26 09:54:40	Share \| Report

All propper vacuum line assambled Ur Quattro's (10V, no clue about the 20V) do that.
Ciao

Werner

Thread:

Having a cold/warm start issue - Pre95 2017-04-25 14:45:54 (299 views)
- Well, I think I tracked down the issue - Bad injector o-ring.. - Pre95 2017-04-26 11:52:46 (297 views)
  - Good catch! You may need to tweak the mixture once you get the leaks all sealed up... - msvphoto 2017-04-27 15:22:08 (239 views)
  - I was able to pull the wobbly injector by hand, O-ring hard as a rock.. - Pre95 2017-04-26 23:55:43 (262 views)
    - Do you have the trick valve cover hold down with injector holders? Some do and some don't - ralleyquattro 2017-04-27 11:45:25 (286 views)
      - Here are all the cars that had the injector "retaining strip" - pinkmanct 2017-04-28 22:37:45 (425 views)
      - Nope, the injector cooling shroud has cutouts for each injector but nothing to hold them   -  Pre95  2017-04-27 11:52:37 (344 views)
        
        Looks like MB had different part number so that theory might hold true.   -  ralleyquattro  2017-04-27 09:18:41 (234 views)
        
        Great cold start this morning, and made sure to get her nice and hot for warm start testing  -  Pre95  2017-04-27 15:02:21 (250 views)
        
        For proper hot you need it to sit there nice and hot for 15 min to let the vapor lock establish.   -  ralleyquattro  2017-04-27 16:07:15 (266 views)
        
        Lonnggg driveway idle test complete: Temps got warmer then I'd like to see but she's happy  -  Pre95  2017-04-27 17:43:52 (259 views)
    - If you have the 2piece version, just get the plastic front part and the the seals. - wego0001 2017-04-27 07:35:37 (270 views)
- How are your vacuum lines?? Does the dip stick seal properly? - wego0001 2017-04-26 07:38:12 (282 views)
  - Vac lines seem older, but chemtool says they are OK. Oil dipstick.. - Pre95 2017-04-26 09:54:40 (295 views)
    - When the engine is running proper, pull the dip stick and it will stall. The same for the oil filler - wego0001 2017-04-26 10:34:21 (278 views)
      - I thought the dip stick pull would just make it stumble...  -  racingiron  2017-04-26 13:17:08 (274 views)
        
        That is how I remember it, and how mine has always been too. Doesn't die w/dipstick, just stumbles.   -  msvphoto  2017-04-26 14:55:43 (299 views)
        
        Makes sense..  -  TyloPuP.. katMAN  2017-05-03 15:53:07 (265 views)
      - oooo I did not know this! How.... odd? I'm confused as to why it would.. - Pre95 2017-04-26 12:04:46 (297 views)
        
        Yes, there is an o-ring and it should seal against vacuum leaking into the crankcase. - msvphoto 2017-04-26 14:58:25 (242 views)
- I had similar situation.. - TyloPuP.. katMAN 2017-04-25 22:00:56 (319 views)
  - After some lite WUR reading on b2resource you could be on to something here.. - Pre95 2017-04-26 09:52:57 (273 views)
    - Giving the WUR a close once over it looks much cleaner then everything else.... - Pre95 2017-04-26 12:25:30 (284 views)
      - Measuring the differential pressure cold vs. hot could shed some light on that also. - msvphoto 2017-04-26 15:00:49 (258 views)

You must be registered and logged in to post. Please select an option:

All messages | Search Forums | Return to UrQ/Sport/Coupe

Copyright © VerticalScope Inc. All rights reserved.

quattroworld.com is an independent Audi enthusiast website owned and operated by VerticalScope Inc. Content on quattroworld.com is generated by its users. quattroworld.com is not in any way affiliated with Audi AG.