quattroworld.com Forums: Thank you

Thank you
Posted by: SForked (2380) on 2015-07-02 10:20:19 In Reply to: and since the ds cam is loaded, if it rotates on accident, dont freak out, just line everything back posted by infinkc on 2015-07-01 17:33:07	Share \| Report

Thread:

Doing my first tb, in order to get the lock pin screwed in I had to turn the crank a touch so it... - SForked 2015-07-01 15:34:04 (414 views)
- no you're good. - EddieWillers 2015-07-05 11:28:59 (86 views)
- Where is the 4th bolt on the cam tensioner? - SForked 2015-07-02 15:01:23 (112 views)
  - Found it... - SForked 2015-07-02 15:56:02 (124 views)
- 2 Things - scottrS4Avant 2015-07-01 23:40:51 (181 views)
  - Ok cool, thanks. - SForked 2015-07-02 10:19:52 (125 views)
- The pin is authoritative. Wiggle the crank to get the pin in all the way. - .jonah 2015-07-01 15:36:42 (193 views)
  - So it's ok if the crank ends up off of the TDC mark like it is now in the pic? - SForked 2015-07-01 15:41:27 (126 views)
    - It has some wiggle room. You can set it so it's dead on if you want to satisfy your OCD. - EddieWillers 2015-07-05 11:29:56 (97 views)
    - once you take the bolts off the crank pulley to remove it you will see how much - infinkc 2015-07-01 17:31:28 (188 views)
      - Sounds good, I already removed the cover before I read this but I will make sure to properly line... - SForked 2015-07-02 10:21:20 (118 views)
    - turn the crank back a tiny bit, will the pin go in any further? cam lock bar go in? - S4gasm (LotR) 2015-07-01 15:45:22 (136 views)
      - Not by hand it won't. Lock bar was on prior to installing the pin.  -  SForked  2015-07-01 15:52:38 (153 views)
        
        remove the cam lock bar, wiggle crank, set lock pin, remove belt, sync cams with cam bar.  -  S4gasm (LotR)  2015-07-01 15:59:20 (168 views)
        
        no, there will always be a few threads exposed even when it's installed all the way.   -  EddieWillers  2015-07-05 11:31:08 (101 views)
        
        i dont recall ever seeing threads remaining, but there is no question when it's all the way in.   -  S4gasm (LotR)  2015-07-07 12:43:06 (77 views)
        
        Will do, thanks man.  -  SForked  2015-07-01 16:04:33 (163 views)
        
        Even less drama with valve covers off.  -  trichard3000  2015-07-05 19:03:07 (92 views)
        
        you'll be fine. remember the DS cam is loaded, PS is not, so you'll feel the PS cam move easier..  -  S4gasm (LotR)  2015-07-01 16:09:51 (176 views)
        
        Make sure you loosen the cam bolts before you pop the sprockets! I seem to forget this often  -  EddieWillers  2015-07-05 11:32:22 (116 views)
        
        I'm good to go, thanks again.   -  SForked  2015-07-01 16:18:44 (134 views)
        
        and since the ds cam is loaded, if it rotates on accident, dont freak out, just line everything back   -  infinkc  2015-07-01 17:33:07 (127 views)
        
        Thank you   -  SForked  2015-07-02 10:20:19 (113 views)

You must be registered and logged in to post. Please select an option:

Copyright © VerticalScope Inc. All rights reserved.

quattroworld.com is an independent Audi enthusiast website owned and operated by VerticalScope Inc. Content on quattroworld.com is generated by its users. quattroworld.com is not in any way affiliated with Audi AG.