quattroworld.com Forums: B5 S4/RS4

Forum Tips \| Search Forums \| Post New Thread
Page: <<< \| 1 \| ... \| 3 \| 4 \| 5 \| 6 \| 7 \| 8 \| 9 \| 10 \| 11 \| ... \| 20 \| ... \| >>>	5567 threads in 112 pages

ESP kicking in during WOT? no tire slip/spin .... - mrpeterparker 2010-02-23 20:48:59 (96 views) Mine used to, although it is very rare these days. PS: recode to 01032 (or whatever final 2 you have - Complacentsee 2010-02-23 22:31:58 (52 views) I don't know why...but my tcu won't take that code. Do you know the "box" id on yours? - turboSquatt 2010-02-24 03:54:08 (11 views) My J box took the code. My 2000 a4 also took the code. - AUDI_S4_ATL 2010-02-24 11:50:04 (10 views) TCU....not ECU. I have a J-box too. With a DR-box tcu. There is also DL and BS. - turboSquatt 2010-02-24 11:58:32 (18 views) DOh! mine is a BS sorry I went dumb for a minute - AUDI_S4_ATL 2010-02-24 12:08:35 (9 views) Ok...that may be my problem. Anyone else want to chime in with their model TCU? 01032 works? - turboSquatt 2010-02-24 18:10:11 (7 views) when are you sending me that TCU to test =P - mrpeterparker 2010-02-23 22:33:05 (13 views) When ever I get my spare... But seriously stock with 01032 feels very differant. I want a 3rd - Complacentsee 2010-02-23 22:36:08 (42 views) what gear? - quickaudi 2010-02-23 21:39:43 (17 views) 3rd - mrpeterparker 2010-02-23 21:48:38 (13 views) missed the fact that you are a tip and seeing slip in the tiptronic. this in sport mode - quickaudi 2010-02-23 23:00:59 (30 views) sport mode - mrpeterparker 2010-02-24 09:48:01 (8 views) it shouldn't do it with it off. - nyet 2010-02-23 21:13:56 (43 views) correction to my statement.. i'm getting slip in my transmission... it's a stg3 tip - mrpeterparker 2010-02-23 21:48:20 (16 views) its stopping your tires from spinning. i turn it off when needed - dans4 2010-02-23 20:56:30 (16 views) Why not just turn it off when you're going WOT ? - kevins42 2010-02-23 20:55:17 (33 views) because we think it might be related to the slip i'm getting during WOT with it TURNED OFF - mrpeterparker 2010-02-23 20:57:56 (21 views) You do get throttle cut when the trans slips....with ESP on anyway. - turboSquatt 2010-02-24 03:56:38 (11 views) I thought the esp is mainly controlling the ABS hence the reason you turn it off for ice/snow? - AUDI_S4_ATL 2010-02-24 00:59:10 (13 views)
Looking to put a stage 3 (recoded for H) M box in my car, is reflashing back to M anything to worry - Avantugofast 2010-02-23 15:37:48 (46 views) nope, just make sure your cluster is coded right. - nyet 2010-02-23 16:03:38 (40 views) cool, that's what i thought. So is that all you do? Is that the "flash"? - Avantugofast 2010-02-23 16:06:32 (17 views) if you were M to start with you dont have to do anything. - nyet 2010-02-23 16:17:10 (18 views) Got it so it's just the cluster i have to re-code. Thanks - Avantugofast 2010-02-23 16:18:20 (14 views) no, if you were M before, your cluster is already recoded correctly. - nyet 2010-02-23 16:19:23 (16 views) but the one i'm buying is M but recoded for an H car, so i have to recode it back for M cluster, no? - Avantugofast 2010-02-23 16:22:43 (16 views) "coding" refers to the cluster, which is not in the ECU - nyet 2010-02-23 16:25:56 (26 views) It's possible that he means the M box ECU has H program on it. - jprice\\ 2010-02-23 16:30:18 (17 views) agreed. - nyet 2010-02-23 16:32:14 (34 views) Thanks all, sorry if there was any confusion. Basically i'm going for"plug and play" i'm trying to - Avantugofast 2010-02-23 16:52:41 (28 views) Yes, nyet is known as "the flash" - jprice\\ 2010-02-23 16:11:13 (39 views) TPIWWP....! - Ram� 2010-02-23 16:32:37 (18 views) ...... - jprice\\ 2010-02-23 16:40:42 (121 views) FFS! - 70 views? - Ram� 2010-02-23 22:43:54 (13 views)
what way to adjust ecode beam pattern for LHD? the lever on the projector - infinkc 2010-02-23 15:01:28 (65 views) The lever swaps from LHD to RHD beam and vice versa... - Ram� 2010-02-23 16:34:05 (41 views) i looked for a label, but couldnt find one, thats why i posted. - infinkc 2010-02-23 17:33:34 (22 views) nope.... there is actually a metal shield that makes that pattern. if you were really crafty - BIAD 2010-02-23 15:09:23 (150 views) There is a lever on the Ecodes, the us lights do not have this. - infinkc 2010-02-23 17:32:48 (101 views) so the left is a US spec, the right is an e-code,,, that's pretty cool? I thought they were all - BIAD 2010-02-23 20:16:47 (26 views) How would you look at that to check if it's level? - Wrinkledpanties 2010-02-23 19:50:34 (10 views) I didn't know that, that is really cool! - Josh C (Blacks4tt) 2010-02-23 19:29:29 (12 views) How did you get that out? I'd love to have a flat pattern for my left side. - Wrinkledpanties 2010-02-23 16:47:04 (12 views) ??? i borrowed the pic. projectors are always for sale on eBay so somehow they come out. - BIAD 2010-02-23 17:17:00 (9 views)
Another Post, Sellin Your Car? - quattropower 2010-02-23 14:39:08 (248 views) mine is 'always for sale' so email me, you don't have an email listed. - UberVier 2010-02-23 22:22:56 (24 views) yes, i am selling. - Arcteryx 2010-02-23 21:21:21 (64 views) He is looking for a stock or stage 1. - jason sowers 2010-02-23 22:05:45 (16 views) I've got an '01.5 in Brilliant Black, 76K miles. - Carson@AutoSpeed 2010-02-23 17:35:55 (84 views) I would however its tip :( i want a manual trans - quattropower 2010-02-23 18:31:44 (14 views) I was going to convert this one to manual. - Carson@AutoSpeed 2010-02-23 20:19:41 (43 views) I bet you don't keep it stock or stage 1 for longer than 2 months. =P - Dang 2010-02-23 15:34:42 (23 views) hehe....:) anythings is possible - quattropower 2010-02-23 15:36:04 (47 views) smart move, i bought a used stage 3 and wound up re-stage 3ing it. I would much prefer to pop its - B56 2010-02-23 16:37:59 (53 views) I've got a Laser 2001.5 w/ 147k miles. Right price takes it.... - ATKS4 2010-02-23 15:20:54 (50 views) Some amazing Stg3's over on AZ. Take your wallet. - d1rt [pr�jekt S4] 2010-02-23 15:19:06 (30 views) :), i know - quattropower 2010-02-23 15:26:51 (76 views) there are many positives to buying a stage 3 - Chaka 2010-02-23 15:44:49 (79 views) Don't let Reid see that you wrote "drive it like an old lady" - d1rt [pr�jekt S4] 2010-02-23 16:02:34 (32 views) I used to see this one old lady driving around in an imola - Chaka 2010-02-23 17:22:35 (22 views) my planes for a stage 3...... - quattropower 2010-02-23 15:48:56 (64 views) why not '00?? - hardon 2010-02-23 15:02:14 (62 views) not planning to do any upgrades in the near future - quattropower 2010-02-23 15:12:33 (83 views) change ur mind about '00 :) I have one for you. - CrazyINP 2010-02-23 15:52:47 (32 views) My advice is if you don't wrench, don't buy unless you have $2k+ at all times - Chaka 2010-02-23 15:40:58 (78 views) no doubt - woods4 2010-02-23 17:08:13 (22 views) last time i asked a dealer it was rougly 6k for turbos - quattropower 2010-02-23 16:02:50 (51 views) Way to put it so plainly. Taking all the fun out of it.... - d1rt [pr�jekt S4] 2010-02-23 15:55:18 (60 views) good luck - quattropower 2010-02-23 16:00:22 (38 views) i know, i do all the works on all my cars - quattropower 2010-02-23 15:45:58 (42 views) LOL then why cant you find a car? Just point out all the crap that needs to be fixed and negotiate - Chaka 2010-02-23 15:48:23 (25 views) its the color and options. - quattropower 2010-02-23 15:52:03 (38 views) 3-5 years k04's will be more than s4's. - jason sowers 2010-02-23 15:19:16 (37 views) Don't be so optimistic... - d1rt [pr�jekt S4] 2010-02-23 15:22:21 (33 views) LOL, I think stage 3+ labor is more than what cars sell for now - Chaka 2010-02-23 15:24:41 (31 views) Yeah...but I try not to think about it. I'm SURE your car is worth way.... - d1rt [pr�jekt S4] 2010-02-23 15:26:55 (51 views) A well maintained running car is worth more than KBB. Problem is maintenance is a big factor for - Chaka 2010-02-23 15:36:15 (51 views) yea, maintance kills - quattropower 2010-02-23 15:37:59 (37 views) you want a santorin with the white suede. i know you do - DxC 2010-02-23 15:00:59 (50 views) are you selln your car??Dxc - quattropower 2010-02-23 15:16:54 (51 views) im selling all my cars except the black one. - DxC 2010-02-23 15:27:35 (31 views) send me some info please!! - quattropower 2010-02-23 15:36:41 (22 views) '00 stage 3 silver in NoVA. but the price has to be 'right'. edit: nevermind. can't read apparently. - KNaudi 2010-02-23 14:55:19 (49 views) effy on silver - quattropower 2010-02-23 14:58:10 (53 views) I won't take that one personally, don't worry. - KNaudi 2010-02-23 15:00:38 (30 views) I will. - d1rt [pr�jekt S4] 2010-02-23 15:11:17 (29 views) whatever. its the fastest, not the sexiest. - KNaudi 2010-02-23 15:23:01 (27 views) cool - quattropower 2010-02-23 15:02:43 (24 views) I take it you've already scoured autotrader and couldn't find one out of 30+? - Chaka 2010-02-23 14:50:09 (30 views) Yeh man, its actually 69 in any distance from my zip - quattropower 2010-02-23 14:55:31 (27 views)
wheels anyone? (not mine) - hardon 2010-02-23 14:02:46 (172 views) whew, hopefully the new owner brushes em out or pc's them. nice wheels though. - B56 2010-02-23 14:22:34 (15 views) yea, seems like a good price for some I-Forged - hardon 2010-02-23 14:29:07 (14 views)
Brake/throttle problem... - SAF 2010-02-23 13:53:27 (50 views) while not the same issue, I had a brake failure that could be related... while traveling at - BIAD 2010-02-23 14:30:03 (24 views) searcxh for B5 brake booster failure on google - Joey@FKAutoworks.com 2010-02-23 14:06:51 (28 views) Snow due tonight (!) but we're in SE TX. - SAF 2010-02-23 14:44:22 (14 views) Here, read this: - Joey@FKAutoworks.com 2010-02-23 15:07:58 (29 views) check the vac. hose that goes through the battery tray wall, make sure its plugged in/not broken - mike 2010-02-23 13:55:31 (30 views) Bingo, the first check valve broke open. $25 part. Thanks all! - SAF 2010-02-23 18:48:27 (13 views) Glad I was wrong:) - Joey@FKAutoworks.com 2010-02-24 14:36:01 (4 views)
How much do used AWE fueling kits go for? - tugin_s4 2010-02-23 13:51:59 (10 views) 1300-1500 would be a good estimate. - jason sowers 2010-02-23 13:53:08 (10 views) 2nd. I got one for 1250 with and flashloader and Moss race tune - Afterthought 2010-02-23 13:56:04 (34 views)
Battery Voltages Fluctuate... - AudiSportB5S4 2010-02-23 12:49:18 (47 views) tighten down ALL of the bolts @ the positive battery terminal - mrpeterparker 2010-02-23 20:33:51 (4 views) Do you have a capacitor between the battery and your amplifiers? - Ram� 2010-02-23 13:05:23 (12 views) Not an aftermarket one... If there is one in place then sure, but I never bought one haha... - AudiSportB5S4 2010-02-23 13:15:34 (12 views) Try installing one - that should level out the distribution and your needle! - Ram� 2010-02-23 13:17:37 (10 views) 2nd. - quickaudi 2010-02-23 21:44:36 (3 views)
Not a bad price - hardon 2010-02-23 12:36:59 (253 views) Here..... - jprice\\ 2010-02-24 00:48:26 (37 views) wow, car has quite the history. resourceful arent we? :p - hardon 2010-02-24 20:22:18 (5 views) The black ruins the Imola :( - Tarbo 2010-02-23 14:00:59 (19 views) There's an S4 with new K04s in running stock tune here in MN for sale. Also lower miles! - jprice\\ 2010-02-23 13:51:46 (30 views) link? - jason sowers 2010-02-23 14:23:15 (17 views) ygm - jprice\\ 2010-02-23 14:33:20 (17 views) thank JP. - jason sowers 2010-02-23 14:36:52 (14 views) Info posted in another forum (private) - jprice\\ 2010-02-23 14:32:23 (39 views) Heh.. the power claims seem quite optimistic ;) - jprice\\ 2010-02-23 13:46:09 (22 views) no shit. 350whp on stock fueling. - jason sowers 2010-02-23 13:52:28 (18 views) I love when people "guess" the power their cars are making. - jprice\\ 2010-02-23 14:29:08 (24 views) I doubt my AWE stage 3 car put down 350 to the wheels. - jason sowers 2010-02-23 14:38:06 (15 views) Not sure where you would get that kind of work done in Iowa, especially Waterloo. - AJ 2010-02-23 12:52:44 (27 views) PM BELITTLE he has a shop in IOWA CITY where he does installs for a super good deal - ajb_unc 2010-02-24 00:28:18 (11 views) i think there is a tuning shop around that area. - OndrejAudiA420 2010-02-23 23:19:27 (9 views) Almost baught a car similar to that in Iowa back in Aug. - d1rt [pr�jekt S4] 2010-02-23 13:34:29 (20 views) stage 2+ with K04's? - jason sowers 2010-02-23 12:44:56 (25 views) thats what i was curious about - hardon 2010-02-23 13:46:36 (17 views)
wiper blades BT: get both driver and pass in 22" OR driver - 21"and pass - 22" ? - jakecro [ww] 2010-02-23 10:58:00 (45 views) I've had the same pair of PIAA Super Forza Silicone for the past 3-4 years - WashparkS4 2010-02-23 12:40:35 (40 views) i think i use a 19" on my pass side bc it dtives me nuts that the side goes off the window. - jason sowers 2010-02-23 11:26:55 (29 views) I run 19" passenger side also as the corner or my hood got chipped - hardon 2010-02-23 11:49:16 (29 views) What goes off the car? like I said, I have 21" and they stay all the way on the glass? - BIAD 2010-02-23 11:57:26 (26 views) Please hold, pic is required for explanation... - hardon 2010-02-23 12:37:50 (19 views) here - hardon 2010-02-23 13:54:48 (109 views) That's odd,, I just had my car out and mine comes no where near hitting,,, I guess like others - BIAD 2010-02-23 20:19:45 (13 views) Reclock your wiper arms. problem solved. but agreed - hate when the wiper is too long. - Wrinkledpanties 2010-02-23 16:45:39 (10 views) Yes ^^ Take off the arms & reset the spline postion - JPQUATTRO 2010-02-23 23:39:43 (9 views) mine looks the same minus touch-up paint. - mike 2010-02-23 13:57:05 (12 views) touch-up paint is simply to prevent salt getting onto the exposed spots. - hardon 2010-02-23 16:21:38 (16 views) yeah i figured. i need to do the same. - mike 2010-02-23 17:50:27 (11 views) 2nd - SilverAudIan 2010-02-23 11:31:06 (18 views) I have those rain-x latitude blades and they are both 21"? At least that's what the book said. - BIAD 2010-02-23 11:02:57 (27 views) I've been very happy with the Valeo Ultimate blades that Tire Rack sells - jakecro [ww] 2010-02-23 12:16:20 (37 views) Do you like them? I have em and they only lasted about 3 months...then started streaking badly... - SilverAudIan 2010-02-23 11:20:17 (44 views) Icons equally suck if not surpass that... - hardon 2010-02-23 11:54:45 (60 views) bosch icons suck too. - jason sowers 2010-02-23 11:32:36 (20 views) Skip on anything resembling an aero wiper blade. The standard type blades always worked better - Wrinkledpanties 2010-02-23 11:25:20 (63 views) Agreed as well. If you have an avant, I recommend the GTI rear wiper upgrade as well! - dspang 2010-02-24 12:28:23 (8 views) Agreed. OEM aero arms/blades are difinitely worth it. - Nero S4 2010-02-23 12:08:03 (48 views) I'll let you know in 3 months than, just threw them on Saturday, Buy one get one free at Pepboys - BIAD 2010-02-23 11:25:12 (25 views)
Need some bumper and insurance help after my parked car gets hit. Stupid story ahead - NoLiftShift (mizzike2555) 2010-02-23 04:37:38 (144 views) Make sure you check that your bumper shocks didn't get depressed a bit. - PartyBoyRacing 2010-02-23 13:49:08 (14 views) How can I check the integrety of the bumper shocks? and if there is something wrong do they... - NoLiftShift (mizzike2555) 2010-02-24 01:29:25 (11 views) Need to pull them off to make sure the rear caps are still on & measure the extension. - PartyBoyRacing 2010-02-24 09:50:04 (10 views) Gotta love the morals and honesty of church people...more - audikidS4 2010-02-23 09:12:00 (96 views) her insurance agreed to pay for it. I might just put up the diff. for an rs4 bumper. Would this - NoLiftShift (mizzike2555) 2010-02-24 01:36:13 (9 views)
Sending the feelers out again. Looking for a stg3 B5 S4. - brunnhizzle 2010-02-23 04:09:09 (110 views) My 2001.5 Stage 3 Laser 64k miles and custom interior is for sale - ajb_unc 2010-02-24 00:31:01 (40 views) Nice. What were you looking to get for it? - brunnhizzle 2010-02-24 01:42:02 (6 views) mine is for sale. - Arcteryx 2010-02-23 10:58:14 (115 views) ygm - DxC 2010-02-23 10:29:55 (21 views) mine's for sale - S4NIC8 2010-02-23 10:09:39 (125 views) Damn. - Avantugofast 2010-02-23 12:09:32 (13 views)
Brake Pad Debate - NoLiftShift (mizzike2555) 2010-02-23 03:08:16 (68 views) I'm on my 2nd set of HPS, love them, they are not garbage for street use. - UberVier 2010-02-23 22:25:45 (12 views) Best to use the same brand front and back. - Frenchy 2010-02-23 15:08:34 (6 views) Why? - Pat 2010-02-24 17:44:55 (5 views) I guess- same friction coefficients, won't mess with the braking balance... - UberVier 2010-02-24 23:10:35 (7 views) I thought the OEM pads had different compounds in the front and rear. No? - Pat 2010-02-25 10:28:57 (8 views) According to the information I have, that's right. I show 0.50 for the front, 0.40 for the rear - Gollygwagen 2010-02-25 11:01:29 (14 views) Yup. In fact, that's the easiest way to modify brake bias. - veloscaraptor 2010-02-25 05:49:53 (4 views) I are smrt. - UberVier 2010-02-25 22:52:39 (4 views) Been using Mintex Redbox for 5 years of DD. More bite, low dust, no squeal, long lasting...me likey. - PartyBoyRacing 2010-02-23 13:52:55 (8 views) I had OEM....switched to Hawk HPS. Hawks perform much better for my driving style. - turboSquatt 2010-02-23 12:16:23 (25 views) I love my Carbotech Bobcat's. Hated the Axxis pads that came with my Stoptechs... - hardon 2010-02-23 11:14:02 (12 views) I decided to go Hawk HP+ front and rear - veloscaraptor 2010-02-23 11:04:40 (22 views) I just installed Axcess Ultimate Cermaic. I like them so far. Only squeek a little when I first - audikidS4 2010-02-23 09:23:28 (29 views) Not for the performance-minded - Pat 2010-02-23 09:50:59 (12 views) ??? - audikidS4 2010-02-23 09:54:24 (9 views) for street use pagid or ebc, if low dust is priority try ceramic pads - Nadrealista 2010-02-23 08:38:35 (23 views)
Dyno..... - Dr.quattro 2010-02-23 00:20:38 (477 views) yeah ..dangerously lean ..esp for race conditions - lemioux@curbside 2010-02-23 07:51:00 (40 views) TJ . Hey Alex ! How's things back in the Olde Country ? - kevins42 2010-02-23 18:34:18 (28 views) any chance you can get ECUxPlot working? or is that a standalone ECU? - nyet 2010-02-23 01:11:08 (72 views) Will ECUxPlot work with AIM xml pista? - Dr.quattro 2010-02-23 04:08:57 (54 views) i dont know what that means :( - nyet 2010-02-23 14:43:31 (28 views) It's the data logger we use during races. - Dr.quattro 2010-02-23 16:24:43 (38 views) hmm if it uses the same sample rate as VCDS/VAGCOM it might not be that useful... - nyet 2010-02-23 16:27:42 (26 views) send me a log, and ill add support for it! - nyet 2010-02-23 16:26:28 (26 views) What form you want them in? - Maverick14 2010-02-23 22:43:55 (20 views) absolutely NOT anything like that. MS formats are a disaster, nothing can parse them. - nyet 2010-02-23 23:39:34 (18 views) You got this Danny? - Dr.quattro 2010-02-24 00:11:30 (16 views) Lemme see what I can do... - Maverick14 2010-02-24 15:55:24 (14 views) If you have documentation for the format (and its relatively stable) i can probably do it - nyet 2010-02-24 16:20:41 (16 views) Would you be willing to download the Race Studio software from the AIM website? - Maverick14 2010-02-25 11:34:33 (11 views) Still need to download all the info from this weekend and figure out how to - Dr.quattro 2010-02-23 20:31:25 (25 views) ECU for sure. We will look into ECUxPlot - Dr.quattro 2010-02-23 01:33:40 (70 views) For best results, you'll need ECUx too :( - nyet 2010-02-23 02:04:07 (56 views) how accurate is the A/F reading? If it's from a tailpipe sniffer, it's probably off a good bit. - crew219 2010-02-23 01:04:07 (71 views) It was a tailpipe sniffer...so probably a bit off - Maverick14 2010-02-23 01:16:44 (87 views) are you running test pipes? highflow cats? or stock cats? - Rice Rocket 2010-02-23 01:24:50 (74 views) Test pipes. - Dr.quattro 2010-02-23 01:34:23 (67 views) with test pipes, afr shouldnt be too far off - Rice Rocket 2010-02-23 01:38:26 (81 views) No real need for cats in a race car though, haha - Maverick14 2010-02-23 02:15:41 (54 views) To far off where we are? The car feels really strong and temps good. - Dr.quattro 2010-02-23 01:42:44 (63 views) looks very lean to me, especially cali 91 - Rice Rocket 2010-02-23 00:47:49 (196 views) I don't think even my GT car was that lean. - SIMPPLY@WMS 2010-02-23 01:55:30 (68 views) hell no, with race fuel you were in mid 12's - Rice Rocket 2010-02-23 02:14:42 (136 views) Around 12 is our goal... - Maverick14 2010-02-23 02:19:15 (89 views) yes he is right - Rice Rocket 2010-02-23 02:21:39 (83 views) peak torque is where it spikes.... - Dr.quattro 2010-02-23 02:26:40 (50 views) Will definitely check into it, thx - Maverick14 2010-02-23 02:23:31 (47 views) That still has the revolver cams in it right? - Derek 2010-02-23 01:17:02 (71 views) Yep. Basically, it's the same car bauer built. No "major" tweaks since then. - Dr.quattro 2010-02-23 01:35:29 (68 views) Yep. Thinking about having tuning done to get more fuel in there. - Dr.quattro 2010-02-23 00:59:28 (110 views) i've logged on my cars on the street. just do it early morning : ) - SIMPPLY@WMS 2010-02-23 01:51:18 (66 views) And NOT in San Ramon!!!! - Dr.quattro 2010-02-23 01:59:46 (95 views) I could outrun em...hahaha - Maverick14 2010-02-23 02:17:36 (53 views) that sucks. We drag race right outside our shop almost everyday : ) - SIMPPLY@WMS 2010-02-23 02:03:02 (66 views) You got a hemi? - Dr.quattro 2010-02-23 02:05:39 (75 views) naww I'm a Ford guy but do have a few fast Euros : ) - SIMPPLY@WMS 2010-02-23 02:08:22 (87 views) What do you think got me out of a ticket - Dr.quattro 2010-02-23 02:14:52 (173 views) do want! - Rice Rocket 2010-02-23 02:22:11 (63 views) Had it since I was a teenager (now 33).......it was a rust bucket. Tuning was MUCH simpler!!!! - Dr.quattro 2010-02-23 02:29:27 (64 views) very nice! my sister and i want to get one - Rice Rocket 2010-02-23 02:33:41 (47 views) Chinese version of bang bus? - SIMPPLY@WMS 2010-02-23 02:36:56 (79 views) hahahahahaha more like chinese knock off bang bus - Rice Rocket 2010-02-23 02:37:37 (59 views) HA! No affiliation.....but actually thought of getting a license plate saying bngbus.... - Dr.quattro 2010-02-23 02:42:09 (49 views) Let me know. I'm a mile from a guy in Norcal - Dr.quattro 2010-02-23 02:35:44 (109 views) at peak boost, looks like you are still very close to 14afr or high 13's - Rice Rocket 2010-02-23 01:23:49 (79 views) So what should we consider to get it lower? Software tweak or mechanical? - Dr.quattro 2010-02-23 01:38:36 (82 views) uh wut? - nyet 2010-02-23 01:39:52 (140 views) I understand "leaning" on a tuner, but knowing the mechanincs of how it works is sweet. - Dr.quattro 2010-02-23 01:56:17 (94 views) None of the tuners are going to tell you how to do anything - nyet 2010-02-23 01:57:29 (102 views) Granted. Frustrating! I want to understand what is happening and how to change it! - Dr.quattro 2010-02-23 02:00:52 (88 views) Read the link! - nyet 2010-02-23 02:02:01 (101 views) Do I take the red pill or the blue? - Dr.quattro 2010-02-23 02:08:40 (83 views) It will take some time, and you may never get as good results as a "pro" - nyet 2010-02-23 14:45:10 (41 views) listen to this man^^^^^ - SIMPPLY@WMS 2010-02-23 02:04:21 (61 views) ohi sir - nyet 2010-02-23 02:06:08 (97 views) You should be embarassed! Kidding. Thanks for the advice for sure. - Dr.quattro 2010-02-23 02:38:48 (64 views) Come by anytime you want! this one is on the house : ) - SIMPPLY@WMS 2010-02-23 02:10:33 (89 views) I've heard that before...on the house.....kidding! - Dr.quattro 2010-02-23 02:40:22 (65 views) Bottom line: mike is the man - nyet 2010-02-23 14:46:33 (37 views) Sorry to hear that man. Glad you are on the upswing! - Dr.quattro 2010-02-23 20:33:34 (20 views) Before I click the linky....... - Dr.quattro 2010-02-23 01:48:41 (102 views) Seth, it might be worth replacing the fuel filter to at this point. Don't think it has been done. - Justin:NorCal 2010-02-23 02:18:10 (55 views) dammit, you beat me to it! - Rice Rocket 2010-02-23 02:23:06 (50 views) good point. What do you think of the #'s above? - Dr.quattro 2010-02-23 02:21:50 (50 views) I think they are spot on, IIRC was 446whp at ETGP few years back. - Justin:NorCal 2010-02-23 02:52:11 (42 views) Seems like tunes have changed since then no? - Dr.quattro 2010-02-23 03:15:26 (40 views) Not that I am aware of, revolver cams were in during that competition. Have you talked to Ben... - Justin:NorCal 2010-02-23 21:05:26 (22 views) Actually GIAC didn't, Jeff Moss did the initial tune and when cams went in Shaun did some tweaking. - Justin:NorCal 2010-02-23 02:15:02 (55 views) Sounds right. I was thinking GIAC based on a few years ago - Dr.quattro 2010-02-23 02:23:38 (69 views) Finding a new tuner has actually been on my mind the last few weeks... - Maverick14 2010-02-23 02:27:40 (66 views) I'm now convinced. Where do we go? - Dr.quattro 2010-02-23 02:31:21 (73 views) Guys, why can't Javad help? He knows his shit, he is close, good dyno... - Justin:NorCal 2010-02-23 02:56:50 (70 views) In my experience, once you go DIY, tuners will stop talking to you - nyet 2010-02-23 14:43:56 (43 views) Christian ran the dyno....cars at 034 right now. - Dr.quattro 2010-02-23 03:14:21 (43 views) stock ECU meaning stock ECU hardware, not tuning :) - nyet 2010-02-23 01:56:06 (102 views) Now I'm thinking. I guess we can check the chastity belt. Will report back tomorrow. - Dr.quattro 2010-02-23 02:04:24 (78 views) You have a 4-5 year old software. Much nicer stuff out today. - SIMPPLY@WMS 2010-02-23 01:53:57 (94 views) It's on 97...but ya, still a bit lean - Maverick14 2010-02-23 00:55:27 (86 views) on race fuel, after 5500ish is fine imo, but at peak boost afr was at 14 - Rice Rocket 2010-02-23 01:22:38 (84 views)
Has anyone done this (see link inside)... - D'villeAR(akaNappy) 2010-02-22 23:54:15 (94 views) and the whole point of the concealed display is? - Jonathan C 2010-02-23 18:51:50 (8 views) Boost gauge in your rear view - good for keepin' an eye on pressure while evading the Police!... - audikidS4 2010-02-23 09:19:10 (17 views) repost I believe look few pages back - Vedran.Krizanovic 2010-02-23 00:29:04 (24 views)
aero wiper setup - veloscaraptor 2010-02-22 23:46:41 (91 views) i just oprdered replacement aero blades and drivers side had issues - 6force 2010-02-24 09:52:23 (16 views) Just go with Bosch Icons... They don't streak and are just the best thing to happen to wipers in a - AudiSportB5S4 2010-02-23 13:05:13 (31 views) my icons started to streak at about 3 weeks, more than a year ago - veloscaraptor 2010-02-23 13:17:32 (21 views) Wow weird... like I said to jason I have these on all the vehicles at my house, all lasting so far - AudiSportB5S4 2010-02-24 01:50:18 (11 views) what? - jason sowers 2010-02-23 13:11:04 (25 views) hmm idk about that.. I just replaced my set of Icons, the previous set on the car 2 full years. Just - AudiSportB5S4 2010-02-24 01:49:26 (10 views) I probably just have a bad batch. ; ) - jason sowers 2010-02-24 01:52:15 (6 views) I installed Michelin contour wiper blades and driver side one leaves pretty bad streak anytime - Nadrealista 2010-02-23 08:51:32 (23 views) I believe those are still correct. You don't need the caps though, your current ones will work with - casablanca avant 2010-02-23 06:20:32 (27 views)
Bad trip computer pixels, random temps, sunroof troubles, seat movement troubles - all bad cluster? - ZZ Cett 2010-02-22 21:32:19 (50 views) For the sunroof - with all electrical off just rotate it a few times while pressing up slightly. - PartyBoyRacing 2010-02-23 13:55:56 (14 views) Great idea- thanks! - ZZ Cett 2010-02-23 22:25:26 (2 views) Those all sound like separate problems to me. shrug - Wrinkledpanties 2010-02-22 23:06:23 (5 views) OK- that's what I was afraid of, but was just hoping it was in done by one common system.... - ZZ Cett 2010-02-23 22:24:48 (5 views) cluster fvcked - Dr. Tran 2010-02-22 21:55:25 (5 views) So, a new inst. cluster will fix everything? - ZZ Cett 2010-02-22 22:03:44 (11 views) It will fix your cluster problem. Sunroof, windows, and seats are all related to their respective - Wrinkledpanties 2010-02-22 23:07:37 (19 views) here's one time it was covered - Dr. Tran 2010-02-22 22:20:20 (36 views)
Back from T-Hill again and more joy to be had in the S4!!! - Dr.quattro 2010-02-22 20:46:22 (429 views) I like what I see, what size are those NT01? are those wheels 18x9? - tekillator 2010-02-24 00:08:20 (8 views) Yep...Nitto NT01, 235/40/18 - Dr.quattro 2010-02-24 00:36:42 (10 views) Are you guys running any backing plates against the pads? - Pie4Foo 2010-02-23 11:37:51 (22 views) I don't think so. Good idea to do it? - Dr.quattro 2010-02-23 13:47:41 (15 views) Wow! I have the same ramps as a real race car! (first pic) - Slag 2010-02-23 09:57:30 (20 views) The ramps definately make the car faster. - Dr.quattro 2010-02-23 13:49:36 (10 views) What times are you turning? - s4wood 2010-02-23 09:31:28 (18 views) At about 7/10ths we were running 2:11-2:12 full track with the crows nest. - Dr.quattro 2010-02-23 14:15:35 (16 views) Nice! These cars eat brakes at the track... - Frenchy 2010-02-22 22:03:25 (94 views) Yep, sounds about right! - Dr.quattro 2010-02-22 22:18:15 (73 views) Hey Dr. Quattro, perhaps I missed it but, when did you get a b5s4? Also... - D'villeAR(akaNappy) 2010-02-22 21:46:01 (76 views) It was a recent acquisition, with a fellow FRRG member Mavreick..... - Dr.quattro 2010-02-22 22:26:52 (71 views) So which pulls harder, the modded s4 or your v8. - D'villeAR(akaNappy) 2010-02-22 23:55:17 (30 views) On the street? - Dr.quattro 2010-02-23 00:17:19 (66 views) great writeup thanks! - nyet 2010-02-22 21:00:28 (35 views) what pads and fluid are in there? how fresh is the fluid? - TwentyValve 2010-02-22 21:00:02 (70 views) They are SBS pro track pads...... - Dr.quattro 2010-02-22 21:37:55 (72 views) try the Pro Race next time. - Andrew C. :: Dirty WB 2010-02-23 11:17:28 (17 views)
WMS has the best reputation - BackCrackin S4 2010-02-22 20:45:42 (241 views) lol nice. - SIMPPLY@WMS 2010-02-23 02:00:55 (9 views) "Basically stock" LOL ! - kevins42 2010-02-22 22:38:09 (70 views) "Basically stock (RS4 stuff)" ... the latter is implied, I thought everyone understood that. - S4NIC8 2010-02-23 10:00:53 (14 views) Maybe within the S4 forums it is. But it is kinda unfair to those on the outside. - kevins42 2010-02-23 17:52:49 (17 views) I dont like to tell people whats under my hood unless I know them.... - BackCrackin S4 2010-02-23 18:01:19 (19 views) OK, I can understand that. - kevins42 2010-02-23 18:35:47 (7 views) hahaha very nice... - AudiSportB5S4 2010-02-23 13:04:34 (7 views) LOL! Awesome story. - TwentyValve 2010-02-22 21:01:11 (30 views) NOT - BrokenRocket 2010-02-22 23:41:07 (144 views)
any options for a torn slave cylinder boot besides replacing the whole cylinder? - cletus141 2010-02-22 20:44:53 (19 views) I have a new clutch slave that i bought from JHM for sale. Make an offer if interested. - B56 2010-02-23 11:25:13 (4 views)
B8 S4 Avant pron x-post - DD (CA) 2010-02-22 20:40:28 (425 views) B5 RS4 > that - TS4F 2010-03-01 06:20:11 (3 views) dewd. yes, and RS2 > that - DD (CA) 2010-03-01 12:42:08 (4 views) oh my god - hardon 2010-02-23 12:03:40 (16 views) nice Q-ish audi :p - lemioux@curbside 2010-02-23 06:04:42 (12 views) Agreed, Looks like a Q7 from that rear 3/4 shot... - BRK 2010-02-23 09:51:34 (15 views) Nah, I've had mine long enough...provided this thing comes over... - DD (CA) 2010-02-23 11:47:34 (12 views) That is beautiful!! - AvantS4Me 2010-02-22 22:02:55 (17 views) Unobtainium. - MarkFank 2010-02-22 21:19:48 (25 views) Mark watched Avatar too many times? - Vedran.Krizanovic 2010-02-23 00:30:26 (22 views) That's been around long before Avatar. When I saw it in the theater, I totally LMAO. - PKmode 2010-02-23 10:53:57 (11 views) haha, big 2nd - phillys4951 2010-02-23 15:09:57 (14 views) I think you can through MTM - @wesome 2010-02-22 21:55:22 (22 views) It is perfect. - jason sowers 2010-02-22 20:57:41 (62 views) thats a big tush - mmart6545 2010-02-22 20:43:14 (24 views)
brake line issue - veloscaraptor 2010-02-22 19:37:42 (32 views) Heat. - FixedWing 2010-02-22 23:39:02 (8 views)
14+ volts shown on the cluster = okay alternator? - BIAD 2010-02-22 17:59:23 (15 views) thanks for the replies, I was getting a dead battery and quickly swapped for one I thought was - BIAD 2010-02-23 12:00:41 (8 views) 14+ is good. Mine went down to 12, then 10, then 8...That's bad (replaced alternator and battery) - krypt0 2010-02-22 20:29:26 (2 views) that's what I usually see, just a tick over the 14 volts line. - KNaudi 2010-02-22 18:44:44 (5 views) Yup. - veloscaraptor 2010-02-22 18:30:54 (4 views)
Quick pricing Q: About how much to repaint the hatch on an avant? - d1rt [pr�jekt S4] 2010-02-22 15:39:36 (79 views) $200-300 - davenew 2010-02-22 20:10:09 (17 views) I'm curious about replacing the rear lic plate piece, too. - Mirror\|rorriM 2010-02-22 18:32:08 (25 views) I went to the hardware store and got creative with some random metal clips that I drilled and - bingS4 2010-02-23 10:23:00 (5 views) Same here. I have one hole that is jacked. - jason sowers 2010-02-22 21:00:35 (12 views) Oh yeah, that's good times. The piece is $250 and comes unpainted. Joy. BTDT. - SUV 2010-02-22 19:23:19 (5 views) Mine was just bent very slightly so I dont think Id have to replace that on mine. - d1rt [pr�jekt S4] 2010-02-22 19:27:18 (8 views) I gave up on it. My plate hangs by one screw, and there's a couple dings / scratches. - SUV 2010-02-22 19:30:11 (9 views) industrial strength double sided tape FTMFW.....going strong for 2 + years including touchless - casablanca avant 2010-02-22 21:16:41 (8 views) It's going to be wildly variable depending on how big, where it is, and how much they blend it. - Wrinkledpanties 2010-02-22 16:09:06 (29 views) But it's so annoying. And it sticks out on silver. Black or blue would disguise it. - d1rt [pr�jekt S4] 2010-02-22 16:17:18 (32 views) You really need to get an estimate from a body shop. It could be pretty cheap if they can bang it - Wrinkledpanties 2010-02-22 16:24:26 (30 views) If it's more than maybe $400, I'll just leave it. - d1rt [pr�jekt S4] 2010-02-22 16:28:53 (27 views) or - jason sowers 2010-02-22 16:30:16 (34 views) lol..good one. Stg3 first. - d1rt [pr�jekt S4] 2010-02-22 16:31:25 (6 views) you don't have to respray a whole hatch. They can blend it. - jason sowers 2010-02-22 16:19:11 (12 views) Or just a dent doctor. - jason sowers 2010-02-22 16:10:48 (10 views) leave it. - jason sowers 2010-02-22 16:02:02 (13 views) Above response is to this.^ ^ - d1rt [pr�jekt S4] 2010-02-22 16:18:39 (11 views)
Pass side airbag and my glove box - Passenger Side (N131) Resistance too High - Intermittent - MySTG3S4 2010-02-22 15:27:55 (83 views) could be just the plug being lose They tend to get the code from moving the seats back and forth - Awd2ks4 2010-02-22 16:14:58 (12 views)
dyno pull - DM-S4 2010-02-22 15:18:09 (145 views) Was that a dyno pull or a concert? - Dr.quattro 2010-02-23 00:49:51 (4 views) Hot exhaust? :) - AudiSportB5S4 2010-02-22 20:15:38 (3 views) What'd ya do? - LCP 2010-02-22 20:11:23 (4 views) do you have base line on that dyno? - Rice Rocket 2010-02-22 16:15:42 (32 views) there are usually some numbers to go with dyno pulls, no? - KNaudi 2010-02-22 15:25:42 (12 views)
popping sound from driver's front... - mosmoe (OPG) 2010-02-22 14:12:36 (54 views) Try changing the clocking of the driver`s side front spring - Texas Twin T 2010-02-22 14:39:33 (7 views) 90 degrees? - mosmoe (OPG) 2010-02-22 14:40:09 (4 views) LCA's are one of the first thing's I'd have changed! - Ram� 2010-02-22 14:27:45 (7 views) Going to replace the LCA's. I'll also clock the spring... - mosmoe (OPG) 2010-02-23 12:58:29 (7 views) Yep. Lower bent control arm was bad. Thanks guys! - mosmoe (OPG) 2010-03-01 11:13:03 (3 views) Glad it worked out for you! Congrats & Enjoy!! - Ram� 2010-03-01 16:32:02 (3 views) Thanks! Lesson learned...I won't buy Febi again - mosmoe (OPG) 2010-03-01 16:32:49 (3 views)
Rear Emblem Update - JPQUATTRO 2010-02-22 13:56:25 (430 views) Where in Delaware are you? - //S4 (Rich) 2010-02-22 23:29:37 (9 views) x2 where in de are you?? - MTV2002 2010-02-22 23:58:27 (7 views) to each his own but I prefer the old style badge, its a bit more stealth - Chaka 2010-02-22 17:52:17 (17 views) agreed + heritage - PKmode 2010-02-23 10:56:27 (13 views) 2nd - hardon 2010-02-22 18:16:00 (14 views) 3rd - Nero S4 2010-02-22 19:58:04 (11 views) Was there a "shadow" in the paint from the old badge when you removed it? - Josh C (Blacks4tt) 2010-02-22 15:35:15 (15 views) When I pulled mine off there was no shadowing. - Ricestang 2010-02-22 21:05:18 (8 views) I put it directly over the old badge spot. I cut the paint down with Meguires first, no shadowing - JPQUATTRO 2010-02-22 15:42:04 (13 views) People seem to missplace those pretty often. Looks like you got it though, - d1rt [pr�jekt S4] 2010-02-22 14:52:22 (19 views) Scintillating! - Ram� 2010-02-22 14:39:11 (19 views) Its no Nogaro with Euro tag level. One step at a time - JPQUATTRO 2010-02-22 16:21:41 (17 views) New badge ftw - bimmerchop 2010-02-22 14:36:02 (24 views) You should post some new pics of your car. - d1rt [pr�jekt S4] 2010-02-22 16:30:42 (27 views) lol, thanks... - bimmerchop 2010-02-22 16:44:59 (206 views) WOW !!!! such nice car and awesome pic !! - lemioux@curbside 2010-02-23 06:06:23 (5 views) you should really move your grill before you burn your house down!! - indyaudis4 2010-02-22 18:41:10 (12 views) lmao - bimmerchop 2010-02-22 20:59:41 (17 views) you figure out your plans for your front bumper? - hardon 2010-02-22 17:09:32 (13 views) Unfortunately, not yet - bimmerchop 2010-02-22 17:34:59 (13 views) Hopefully mine will be done in a few weeks. Then maybe it will influence your decision, eh? :) - hardon 2010-02-22 17:45:55 (14 views) Nice, hopefully it will. Can't wait for the pics - bimmerchop 2010-02-22 17:51:20 (11 views) How the hell is it so clean? Original paint? Explain please. Is it a camera effect? - d1rt [pr�jekt S4] 2010-02-22 17:09:28 (23 views) I don't want to side track the thread, but here are a couple things... - bimmerchop 2010-02-22 17:50:40 (57 views) Thanks very much. Nice work. - d1rt [pr�jekt S4] 2010-02-22 17:55:52 (15 views) NP - bimmerchop 2010-02-22 17:58:04 (10 views) new badge on an old badge car? hmmm... I don't know about that. - BIAD 2010-02-22 14:21:27 (22 views) I know. I see on here its taboo to some but I likes - JPQUATTRO 2010-02-22 14:28:27 (20 views)
So a friend of mine ran a tank of 87 through her 2.0T... - PitchS4 (mike) 2010-02-22 09:44:09 (281 views) she didn't mess up anything with 87 octane in it. I have a buddy - Vedran.Krizanovic 2010-02-22 14:35:54 (119 views) yeap what he said - Nadrealista 2010-02-22 15:55:50 (129 views) damn I guess I was right haha I bet that's what my friends will look like as well - Vedran.Krizanovic 2010-02-22 18:34:18 (8 views) abe? - jason sowers 2010-02-22 15:09:53 (14 views) Yep. His car sounds like its gonna fall apart at idle - Vedran.Krizanovic 2010-02-22 18:33:03 (6 views) Vibration won't be related to 87 octane. It's the same gas as premium, just with less octane. - Wrinkledpanties 2010-02-22 13:35:15 (57 views) Higher octane fuel has been further refined and had some - Flyboy 2010-02-22 14:08:27 (56 views) I'm going to have to disagree with you. The extra refinement steps are to increase the octane - Wrinkledpanties 2010-02-22 14:51:05 (47 views) Octane concentration? I'm familiar with octane rating but I don't recall - Flyboy 2010-02-23 21:10:30 (16 views) The 2.0T vibrates "like crazy" at idle anyway with the Tip. At least that's been my esperience. - Gus 2010-02-22 12:13:27 (54 views) if it's stock, nothing happened... just fill up with premium next time around... seafoam - NOTORIOUS VR 2010-02-22 10:21:24 (131 views) LOL! - Nadrealista 2010-02-22 11:12:07 (26 views) My wife has been running 87 oct in her 2.0T Passat for three years now and no problems. - AJ 2010-02-22 10:15:38 (33 views) Hmm maybe it is just the placebo effect. Hopefully the sea form treatment will "make it go away." - PitchS4 (mike) 2010-02-22 10:18:19 (32 views) Pour an "empty" can in it, tell her you've "seafoam'd" it and see what happens...! - Ram� 2010-02-22 10:22:29 (30 views) seafoam her while you're at it. - KNaudi 2010-02-22 10:33:38 (36 views) you missed the obligatory, "she doesn't like the vibration?" joke :p - PitchS4 (mike) 2010-02-22 10:51:11 (59 views) its monday and I haven't had my morning red bull yet. - KNaudi 2010-02-22 10:52:30 (32 views) Top off with 93 ASAP and should be good.... - Ram� 2010-02-22 09:57:23 (33 views) too late she already burned the entire tank... - PitchS4 (mike) 2010-02-22 10:00:54 (29 views) don't see how 87 would mess anything up? ECU will cut timing accordingly and that is about it - Nadrealista 2010-02-22 09:51:05 (35 views) 2nd - jettatoS4 2010-02-22 11:56:09 (20 views) was this the gf, mike? - KNaudi 2010-02-22 09:50:28 (33 views) haha nah, she has the 1.8 in her passat...that thing has its own issues - PitchS4 (mike) 2010-02-22 09:53:04 (65 views) nah. honda chicks are beat. - KNaudi 2010-02-22 09:56:28 (184 views)
F6DTC > F5PDOR - vr_life 2010-02-22 03:56:26 (152 views) Yeah, we've been selling a bunch of those lately.. - MikekiM 2010-02-22 12:45:33 (56 views) How's the life of those plugs on Stage 3+ ? NGK's just don't seem to last very long. - Frenchy 2010-02-22 17:28:43 (8 views) So so, they're still copper so require regular replacement. - MikekiM 2010-02-23 11:27:09 (5 views) I pull my BKR7E every other or every 3rd oil change,,, no more than 9k per set. - BIAD 2010-02-23 11:55:25 (4 views) interesting that you like a warmer plug... - NOTORIOUS VR 2010-02-22 08:25:19 (14 views) neither.NGK BKR7E less than 2.00 a piece. - jason sowers 2010-02-22 05:31:44 (38 views) Yup. - jprice\\ 2010-02-22 15:48:36 (7 views) buck sixty at the autozone!. - BIAD 2010-02-22 14:44:21 (5 views) 2.00 pesos, euros, pounds? - Complacentsee 2010-02-22 12:20:25 (13 views) agreed... - NOTORIOUS VR 2010-02-22 08:25:36 (14 views)
Looking for some K04 inlets, RS4 airbox/used X-1 and a drivers side mirror (no housing) - hardon 2010-02-21 21:14:14 (64 views) I have an RS4 airbox for you... E-mail me! - AudiSportB5S4 2010-02-22 08:50:09 (27 views) ygm - hardon 2010-02-22 17:11:01 (7 views) Always wondered why nobody reuses k03 inlets with some modifications? - Nadrealista 2010-02-22 00:31:20 (21 views) they're cast aluminum and it would be a real hack job to make them work - davenew 2010-02-22 20:15:01 (11 views) I've heard of this being done before, but I am not trying to skimp on anything. - hardon 2010-02-22 11:47:06 (7 views) some people do. its about using the right parts on a car like this for many people though. - mike 2010-02-22 01:19:30 (17 views) 2nd. When u have everything out u should just do it right. - Ricestang 2010-02-22 01:38:16 (12 views) I only have overnight ballasts from japan. - Ricestang 2010-02-21 23:54:45 (23 views) Still waiting for you to email me the address to ship the ballast. - Complacentsee 2010-02-21 22:10:10 (15 views) sorry, ygm - hardon 2010-02-21 22:44:27 (12 views) i thought you only need some stock ballast - Rice Rocket 2010-02-21 21:32:15 (37 views) ?? - hardon 2010-02-21 22:45:02 (41 views) you do have a good point =) - Rice Rocket 2010-02-21 22:55:48 (18 views)
Pics of new Roof - Justin:NorCal 2010-02-21 19:12:32 (697 views) so you put a sticker on your roof? - @wesome 2010-02-22 22:01:10 (16 views) Carbon Fiber: Understanding Dry vs Wet Carbon Fiber (a vinyl was used on my roof) - Justin:NorCal 2010-02-22 16:07:32 (92 views) You know how I feel from your AZ thread :D, but it still looks good - bimmerchop 2010-02-22 14:35:26 (33 views) All things aside, I wish I had your rear Stoptech kit. They don't make it anymore. - Justin:NorCal 2010-02-22 15:29:17 (15 views) FYI, they still make that rear Stoptech kit. I just put one on my car. - cartel 2010-02-23 23:57:53 (6 views) They still make it? I thought they went back to a smaller caliper design? - Justin:NorCal 2010-02-24 02:05:05 (6 views) and I wish I had a GTR to drive around - bimmerchop 2010-02-22 16:52:08 (25 views) Why did you have a sunroof installed? - ~DanQPremiumTequila~ 2010-02-22 12:22:34 (16 views) Its not real carbon fiber, its a sticker that got laid around his sunroof. - matt@ocarbon 2010-02-22 12:26:53 (19 views) did he pull of the roof to install it? - silvermiles 2010-02-22 11:30:03 (15 views) very nice. and super mad propz go to the installer - DxC 2010-02-22 10:29:03 (20 views) Dig it! - audikidS4 2010-02-22 07:56:27 (21 views) who did the install - Awd2ks4 2010-02-21 23:02:31 (28 views) A friend he does professional installations, think it's cool check out his car - Justin:NorCal 2010-02-21 23:11:01 (305 views) looks good! - SIMPPLY@WMS 2010-02-21 22:25:58 (32 views) dry carbon... nice! - NOTORIOUS VR 2010-02-21 20:45:21 (33 views) dry carbon is something very different - Josh C (Blacks4tt) 2010-02-21 21:17:06 (41 views) sorry dry carbon vinyl... - NOTORIOUS VR 2010-02-22 08:26:55 (25 views) lol, semantics nazi - DxC 2010-02-22 10:28:20 (17 views) i can understand the clarification, one is actual carbon, the other is a sticker with a carbon - BIAD 2010-02-22 11:26:23 (46 views) I think the term is improperly used for a couple reasons... - matt@ocarbon 2010-02-22 12:02:03 (52 views) I have $15k worth of real "dry carbon" on the GTR. I know the difference. - Justin:NorCal 2010-02-22 15:31:01 (14 views) I didn't say you don't know the difference, but obviously plenty of people have trouble with it... - matt@ocarbon 2010-02-22 15:32:14 (28 views) Cool, yes this is a 3M Vinyl Application. - Justin:NorCal 2010-02-22 16:01:28 (36 views) thats quite presumptuous ... im pretty sure notorious VR meant it as a "dry carbon look" - DxC 2010-02-22 13:32:05 (41 views) I think the responses in this thread are evidence enough of the misconceptions the name implies. - BIAD 2010-02-22 14:10:50 (29 views) thats b/c people have bad reading comprehension .... read the first sentence in his post - DxC 2010-02-22 14:14:07 (35 views) The first sentence of his post is still not 100% accurate... - matt@ocarbon 2010-02-22 14:18:29 (83 views) can u show me some "dry carbon" overlays that youve done? these all seem glossy - DxC 2010-02-22 14:22:46 (33 views) Another misconception. "Dry carbon" has nothing to do with how the end product looks... - matt@ocarbon 2010-02-22 14:32:23 (79 views) ok, and the picture in the OP clearly looks like the 3M cloth - DxC 2010-02-22 14:37:37 (35 views) If you say so. If its just "semantics" between the real dry carbon fiber and vinyl - matt@ocarbon 2010-02-22 14:43:57 (31 views) lol. are we really going to get into the term dry carbon being a misnomer - DxC 2010-02-22 15:04:02 (30 views) the bigger question is when is the 3M Di-NOC 'Dry' Wood look going to become fashionable. - BIAD 2010-02-22 15:21:24 (30 views) is there a difference between dry stucco and wet stucco? - S4NIC8 2010-02-23 09:49:41 (21 views) yes,,, sorta... ok.... sounds like a good stopping point,,, - BIAD 2010-02-22 14:41:35 (25 views) ??? it's just the clear coat.... matte clear will look matte ??? - BIAD 2010-02-22 14:24:15 (16 views) no it wont, and it wont have that texture - DxC 2010-02-22 14:25:25 (26 views) But neither does a real piece of carbon? I'm confused at what your getting at? If you run your - BIAD 2010-02-22 14:30:01 (23 views) have u felt the vinyl overlay? its not smooth. thats what im getting at. texture is not the same, - DxC 2010-02-22 14:30:55 (22 views) I didn't mean to imply that anyone in this thread was intentionally misleading... - matt@ocarbon 2010-02-22 13:51:45 (22 views) That is why I said it "looked". Vorsteiner is only company that makes anything "dry" for S4. - Justin:NorCal 2010-02-21 21:25:24 (32 views) Is it a "carbon fiber overlay" or a "carbon fiber looking overlay?" - matt@ocarbon 2010-02-21 20:11:13 (92 views) It is the 3M Ni-Doc. Which is the best stuff I have seen for doing this. - Justin:NorCal 2010-02-21 20:20:28 (66 views) Betty betty nice. Oh, and what seats are those? - RS4smokedU 2010-02-21 20:03:41 (63 views) Custom made Recaro Profi SPGs with Audi OEM silver Alcantara straight from Recaro... - Justin:NorCal 2010-02-21 20:22:24 (114 views) Yeah, those seats are rather pimp Justin. I'd love to see better pics of them. Oh & thanks ;^) - RS4smokedU 2010-02-21 22:59:21 (29 views) Please more info on the seats, like price. - hardon 2010-02-21 21:17:56 (32 views) Can't be replicated(only custom Profi in US), don't know price, was a gift. STaTUS makes good... - Justin:NorCal 2010-02-21 21:28:23 (206 views) I like - S40RCE 2010-02-21 19:49:01 (35 views)
anyone know the thickness of a stock LUK clutch disc new? - cletus141 2010-02-21 18:05:35 (20 views) IMO, they are cheap enough (vs. labor cost to replace later) that if they are out of the car and - BIAD 2010-02-22 15:34:09 (6 views) replace if it's to the rivets - jarett hoffman 2.0 2010-02-21 19:15:27 (4 views)
Link to a nice photoshoot over the weekend... Myself and two others - AudiSportB5S4 2010-02-21 17:29:07 (126 views) Your car's looking great bud... - bimmerchop 2010-02-22 14:38:39 (6 views)
Having warm startup issues.....any input would be much appreciated - Sfeezy 2010-02-21 16:37:18 (48 views) Did you replace your coolant temp sensor? How about your fuel pump? - AudiSportB5S4 2010-02-21 17:27:19 (13 views) I am having the same problem, should I replace both coolant temp sensors or just the pass side one? - golfindaily 2010-02-21 21:21:09 (7 views) Pass only - QCRAZY 2010-02-21 22:42:20 (11 views) Why would a coolant temp sensor cause a rough idle? - Sfeezy 2010-02-22 06:46:52 (11 views) You need to do a search! - Ram� 2010-02-22 13:14:46 (7 views) I have! - Sfeezy 2010-02-22 16:45:21 (4 views) No way! - Ram� 2010-02-22 16:50:21 (4 views) Way! - Sfeezy 2010-02-22 20:35:51 (4 views) Nuh-uh! - Ram� 2010-02-22 22:18:35 (4 views) Uh-huh! - Sfeezy 2010-02-23 12:43:25 (6 views) Coolant temp sensor has been replaced....still have the original stock fuel pump - Sfeezy 2010-02-21 20:42:38 (10 views)
A friend of mine from high school is making these now..pretty nice work - s4wood 2010-02-21 12:04:44 (536 views) Nice shape & welds. Good craftsmanship there - QWKDTSN 2010-02-21 22:58:32 (12 views) that would look good in our drag bug : ) - SIMPPLY@WMS 2010-02-21 22:26:41 (12 views) Looks pretty good but yea their should be more upper-body support. lame, that some people have - adubs777 2010-02-21 16:39:47 (81 views) Looks like a go kart seat - S40RCE 2010-02-21 16:27:53 (20 views) That is quality craftsmanship but man that thing only going up mid back would scare me. - Justin:NorCal 2010-02-21 15:13:20 (24 views)
Does Vast have a Dyno? - .357 2010-02-21 09:02:37 (70 views) No, not "in house", but they do have access to one nearby.... - Ram� 2010-02-21 09:18:23 (27 views)
Want to see you car on the Quattroworld front page? If so, here is your chance! - JoshD 2010-02-21 03:14:01 (179 views)
Damnit...Tried to be nice to this car and it fought back... - Grillian 2010-02-20 21:05:17 (213 views) You can get some brass parts at Lowes or Home depot...but - RR 2010-02-22 20:42:19 (9 views) at the very least you should stay out of boost but you should definitely find a way to connect - jakecro [ww] 2010-02-20 23:27:47 (179 views) Alright I'll summon my McGyver powers and rig something. If the rig comes loose while driving can i - Grillian 2010-02-21 10:39:15 (20 views) 2nd. 710Ns and be done with it. - Ricestang 2010-02-21 00:12:50 (18 views) or 710P - Rice Rocket 2010-02-21 15:09:19 (26 views)
Recomended tires in 235-40-18. coil over ? - dans4 2010-02-20 18:26:37 (258 views) hi dan. have you figured out the rear coilover height thing? - Andrew C. :: Dirty WB 2010-02-25 20:24:28 (7 views) well its late now ill check it later. The suspension was bought from you. lol - dans4 2010-03-02 00:16:44 (5 views) depends on how much $ you have avail really ! - lemioux@curbside 2010-02-23 06:16:52 (7 views) i dont want to cheap out on tires. saftey is important to me. - dans4 2010-02-23 13:45:33 (1 view) running Hankook Ventus RS2 235/40-18 with Enkei 18x8 35offset w/ Vogtland GTs - S4-Richmond 2010-02-21 13:57:01 (52 views) trying to stayaway from the stretched tire look. the more rubber the better. - dans4 2010-02-21 17:00:27 (18 views) I've run General Exclaim UHP & Conti ExtremeContact DWS with no rubbing in that size on Vogtland - gutefahrt 2010-02-21 00:53:05 (20 views) Et 30 ? - dans4 2010-02-21 17:03:07 (10 views) http://www.velocitymotoring.com/wheels_v708.html - gutefahrt 2010-02-22 22:27:50 (10 views) I have the Hankook V12 evo. I highly recommend them. - QWKDTSN 2010-02-21 00:49:43 (19 views) how many miles? hows grip and treadwear. ive been reading reviews and people like them. - dans4 2010-02-21 17:02:21 (6 views) that offset seems a bit too much for a stock fender. - NYC_S 2010-02-20 22:02:37 (26 views) you dont think 235s would fit without pulling the fender? - dans4 2010-02-21 16:58:02 (18 views) BBS LM's are 8.5" wide with ET32 last I checked. - Tgr_Clw 2010-02-21 17:08:49 (14 views) tirerack shows et 30 in 18" - dans4 2010-02-21 18:19:39 (9 views) Thanks for correcting me. - Tgr_Clw 2010-02-24 14:47:10 (3 views) yep .. - lemioux@curbside 2010-02-23 06:12:37 (16 views) sup man, is your car in europe now? How's things going? - NYC_S 2010-02-23 20:42:28 (8 views) hey what's up ? yep i'm in Europe now with the car :) B5 66 ASP is tha' new plate - lemioux@curbside 2010-03-03 06:26:21 (2 views) what size tires? fenders pulles? im not that lowered too. - dans4 2010-02-23 13:43:13 (5 views) 235/40/18 front fenders rolled a bit 25"low - no issues. - lemioux@curbside 2010-03-03 06:25:15 (3 views) alright cool i will grab some 235s then. what tires do you run? - dans4 2010-03-03 12:34:59 (3 views) Kyle - "must control boost" gave me some Yoko AVS sports and they are AWESOME - lemieux@curbside 2010-03-05 04:45:46 (3 views)
What to look for when buying an B5 S4 - brockkeen 2010-02-20 13:58:18 (168 views) As others here said, full TB job first. Definetly take care of the tie-rod as well...... - Adam 2010-02-20 18:19:05 (62 views) A car that's not an S4. - Rican_s4 2010-02-20 15:00:53 (30 views) HA! (most people think you're kidding......) - Bimmer Beater 2010-02-20 18:09:13 (34 views) They'll find out the hard way I guess. - Rican_s4 2010-02-25 19:54:02 (5 views) See link...... - MarkFank 2010-02-20 14:19:13 (76 views) I have seen this buyers guide - brockkeen 2010-02-21 17:52:04 (13 views) Regarding timing belt: it's overdue now according to most of people on the forum and the red - bingS4 2010-02-20 14:18:53 (99 views) 2nd - - Reggie 2010-02-20 17:40:08 (32 views) Do it right and get a well known and sorted stage 3 unless you can do work yourself. - jarett hoffman 2.0 2010-02-20 14:08:07 (73 views) what are the upfront stage 3 the costs... - brockkeen 2010-02-21 17:55:10 (28 views) I just went stage 3... - noneckjo 2010-02-21 19:31:01 (38 views) Stage 3 cars can be had for the mid teens. Go to a vendors site and get an idea what a Stage3 kit - jarett hoffman 2.0 2010-02-21 19:12:31 (27 views)
anyone else have trouble using the bentley cd with vista? - Jeff ' s4 2010-02-20 12:49:18 (36 views) Ebahn sucks, I couldn't get it to work with VIsta or 7. You can make it work by.. - stew 2010-02-20 23:25:10 (41 views) we need to convince bentley to put out a normal printed manual. - meem 2010-02-20 15:01:16 (12 views) 2nd - that EBahn reader software is a serious POS - bingS4 2010-02-20 21:45:31 (10 views) yes. i fvcking HATE online bentleys - nyet 2010-02-20 14:52:50 (45 views) turd : ( - Jeff ' s4 2010-02-20 17:04:11 (6 views) I've always had a variety of troubles with it on XP. Why should Vista be any different? - bingS4 2010-02-20 14:15:34 (20 views) Yes - I could never get it to work for over several years with vista. I got it to work with Win 7 - Reggie 2010-02-20 13:37:40 (31 views) I do have a copy of xp... - Jeff ' s4 2010-02-20 17:05:42 (15 views) More info than I can digest here - Reggie 2010-02-20 17:37:10 (18 views) YES! I have to use an older XP machine... - audikidS4 2010-02-20 13:35:17 (10 views) I had the same problem, check this site it might help.... - kyle alask 2010-02-20 13:34:48 (30 views)
Pointless video... But Stage 3 versus Stage 2+ comparison ! - AudiSportB5S4 2010-02-20 11:12:37 (310 views) Did you ask the owner of the stage 2 if he was ready for some fcking VAST power? - Tooned27::Das General::Maury Ballstein 2010-02-20 18:41:34* (18 views) Oh he knew the fcking VAST power was upon him... ;) - AudiSportB5S4 2010-02-21 01:33:32* (13 views) man, sometimes I feel like the Twin 1 sounds nastier than an ASP setup. - hardon 2010-02-20 12:08:44 (77 views) Thanks! The Stage 2+ runs a 4.5FATS on the same exact stretch I run a 3.1X ! :) - AudiSportB5S4 2010-02-20 16:23:07 (19 views) Cool video. That's basically what it looked like when I raced a K04 car... - Z-Tuned (Alex) 2010-02-20 12:01:40 (116 views) Thanks! Yeah I bet... I may be doing a build sooner or later, I want to get at least 150K on my - AudiSportB5S4 2010-02-20 16:22:30 (41 views) How is your car running? Did you get a new tune for it? - hardon 2010-02-20 12:10:26 (23 views) It's at VAST getting upgrades - Z-Tuned (Alex) 2010-02-20 12:37:49 (108 views) What made you do the switch from the southbend clutch to the twin disc? power? - 2001S4ICS 2010-02-20 20:29:29 (15 views) Just preventive measures... - Z-Tuned (Alex) 2010-02-20 20:35:36 (47 views) Ooohhh more goodies! cant wait till its done - hardon 2010-02-20 14:49:07 (17 views) Crossing fingers for late March delivery - Z-Tuned (Alex) 2010-02-20 15:07:18 (19 views) u picking it up from him when it's done? - jarett hoffman 2.0 2010-02-20 14:08:57 (19 views) I'll probably have it trailered back. - Z-Tuned (Alex) 2010-02-20 14:41:06 (47 views) yeah for sure - jarett hoffman 2.0 2010-02-20 18:30:41 (29 views)
Blast from the past: Kerry Getz's Imola S4 - Matt Danger 2010-02-20 11:01:36 (269 views) He drives a Mini now. - d.p 2010-02-22 13:34:59 (11 views) i thought he drove a e55 amg now. - jason sowers 2010-02-23 06:22:21 (5 views) I saw his e46 m3 a few times when I worked at Auto Addictions. That was a nice car! - Tallbino 2010-02-21 14:32:51 (10 views) I have some getz dvs's haha - stew 2010-02-20 23:34:12 (12 views) "catback exhaust, some more horsepower, intake for more airflow.. turbos and stuff" lol. - mike 2010-02-20 20:34:58 (14 views) in his defense, he was modest about it. - mmart6545 2010-02-20 21:59:25 (57 views) yeah, i just thought it was funny sounding. - mike 2010-02-21 12:39:23 (8 views) He knows what he is talking about. - jason sowers 2010-02-21 01:15:06 (47 views) Yeah. He's legit. I just thought it was�funny how the styles have changed. - Matt Danger 2010-02-21 11:31:56 (7 views) I've been looking for pics of this car. Kerry is a nice guy. I have got to drink w him a few times. - jason sowers 2010-02-20 12:40:28 (25 views) Tacky. - Z-Tuned (Alex) 2010-02-20 12:07:31 (19 views) yeah but he doesn't even keep cars for a year. - jason sowers 2010-02-20 12:51:37 (17 views) I believe that :) - Z-Tuned (Alex) 2010-02-20 12:59:34 (15 views)
anyone else have any trouble with the Allen bolts on the driveshaft at the tranny output? - cletus141 2010-02-20 01:42:29 (71 views) Craftsman Bolt Outs - Sindoe 2010-02-21 21:15:33 (8 views) If you're pulling the engine and tranny together, I would just cut the heads off and heat the - Kelbrig1 2010-02-20 21:22:20 (21 views) nope, but certainly questioning that decision. - cletus141 2010-02-21 02:57:42 (7 views) Heat. - FixedWing 2010-02-20 18:26:12 (11 views) IIRC, I hit the threads w/ penetrating oil from the other side of the flange a day before. - sj6sp 2010-02-20 11:44:17 (12 views) They're tough to get to with the DPs in. I used a long extension & an impact. - Matt Danger 2010-02-20 11:12:56 (15 views) THanks guys. I'm getting after it now. - cletus141 2010-02-20 11:04:27 (8 views) don't use an old allen bit.. - davenew 2010-02-20 10:04:54 (32 views) if you cant get it out with vise grips, when that happened to me i hammered a 12 pt 10,mm - S4 Pete 2010-02-20 09:11:43 (21 views) those are a bish. What the others said will work and apply some heat if need be, just be careful - jakecro [ww] 2010-02-20 07:13:47 (19 views) hammer in a torx - Nigel 2010-02-20 03:03:38 (47 views) 2ND. - Joey@FKAutoworks.com 2010-02-20 11:01:21 (26 views) Are u talking about the ones to the rear shaft? - Ricestang 2010-02-20 02:33:29 (43 views) I've removed all of mine. Didn't have any trouble. Similar method, -vicegrip. - Complacentsee 2010-02-20 16:40:38 (6 views) good call. I used vice grips successfully on one. - stew 2010-02-20 03:19:33 (16 views)
Seats? - quattropower 2010-02-20 00:35:57 (80 views) Boxed up with packing materials is around 73lbs each. I shipped mine via Greyhound to somebody - Island Boy :: Jeproks 2010-02-20 16:25:08 (20 views) I've heard they weigh at least 65lbs each. - Disher04 2010-02-20 03:10:12 (15 views) They are really really frickin' heavy. 65 lbs would be a good starting guess. - QWKDTSN 2010-02-20 04:41:47 (31 views) Thanks, - quattropower 2010-02-21 00:13:30 (11 views) I would have said closer to 80 with the motors. - Fixn2xlr8 2010-02-20 06:57:54 (13 views) IIRC, BBB weight savings post on TOF had this info along with many other part weights. - PKmode 2010-02-20 09:55:52 (30 views)
Looking for stock ballasts that no longer work. Anyone with a set or one please LMK, TIA. - hardon 2010-02-19 22:03:17 (27 views) I think rican_s4 has one, if not maybe mental has a couple. - Ricestang 2010-02-20 03:05:14 (24 views) I ror'd! - Ram� 2010-02-19 23:33:49 (7 views) I have one. - Godfather \| Jay 2010-02-19 23:20:12 (11 views) ygm - hardon 2010-02-19 23:40:32 (6 views) what will you give me for it? lol - Complacentsee 2010-02-19 23:00:58 (11 views) we can go behind fridays and ill give you a bj - hardon 2010-02-19 23:34:52 (31 views) You should have lowballed him with a nice little hand job before your offering bj's - jason sowers 2010-02-20 15:12:04 (4 views) Either way I would have required a BJ with a - Complacentsee 2010-02-20 17:59:15 (10 views) I would rather not get herpies. The answer I was looking for was: - Complacentsee 2010-02-19 23:37:04 (52 views) whats your addy? handle name doesnt link me to it - hardon 2010-02-19 23:45:19 (7 views) attached on this one. - Complacentsee 2010-02-19 23:47:18 (16 views) TY and now ygm - hardon 2010-02-20 00:00:51 (7 views) LOL! and ygm - hardon 2010-02-19 23:41:27 (5 views) HAHAHAHAH - jason sowers 2010-02-19 22:04:30 (13 views) Yeah... - Rican_s4 2010-02-19 22:33:31 (13 views) hahaha so its a great idea, sue me!!! - hardon 2010-02-19 23:33:06 (9 views)
cam tensioner seal question. - mike 2010-02-19 21:11:36 (265 views) Sealing cap (core plug) question - scottrS4Avant 2010-02-23 00:48:28 (17 views) I asked a mechanic friend about this and he replied with this - jakecro [ww] 2010-02-23 10:47:46 (10 views) Thanks - scottrS4Avant 2010-02-24 00:02:29 (7 views) I just did this yesterday. Make sure you are at TDC before you start. - Cab_and_wagons 2010-02-20 20:07:16 (25 views) also, I had at least one instance where the tool wasn't compressing the tensioner, so.... - Chaddy 2010-02-20 10:23:21 (46 views) Also, if the tensioner doesn't compress very much, rotate the motor by hand a little and try again. - Matt Danger 2010-02-20 11:03:54 (25 views) Excellent point, those suckers are expensive - Chaddy 2010-02-20 12:04:49 (26 views) Coesurf has the bolts as well as the tool location correct but, - D'villeAR(akaNappy) 2010-02-19 23:15:44 (62 views) great, thanks for the tips. it's been a few years since i've done this job. - mike 2010-02-19 23:16:23 (33 views) are you replacing the cam plugs (bore plugs) as well?? - jakecro [ww] 2010-02-20 07:17:44 (78 views) i didn't buy them, and i have to get the tool back to my mechanic monday morning at 8am, so no go - mike 2010-02-20 11:17:58 (22 views) FYI - they can be sourced @ NAPA with OE p/n - jakecro [ww] 2010-02-20 11:47:33 (18 views) You might want to consider these. I just did mine and they were soaked. It's pretty easy. - Matt Danger 2010-02-20 11:02:53 (22 views) did you just pry them out?? I was poking at mine but was unsure of best way to remove them - jakecro [ww] 2010-02-20 11:35:06 (20 views) Here's a couple photos - coesurf 2010-02-19 22:46:00 (170 views) here's some info from when I did mine... - NOTORIOUS VR 2010-02-21 20:48:10 (20 views) thanks a bunch! - mike 2010-02-19 23:15:43 (27 views) ppleeeeeaaaasssseeee - mike 2010-02-19 22:39:20 (30 views)
DDM 55w HID Install post Lots of pics inside - Rican_s4 2010-02-19 21:10:17 (332 views) Thanks again. - jason sowers 2010-02-19 21:31:25 (18 views) np. - Rican_s4 2010-02-19 21:51:23 (14 views) basically you sacrificed about $125 to make the bottom of the headlight look OEM. - hardon 2010-02-19 21:25:56 (96 views) One of the ballasts was dead and I didn't want to use plexi. I'm not really worried about the $$ for - Rican_s4 2010-02-19 21:40:16 (54 views) yea i suppose if you had a bad ballast is would be worth it. nice install regardless - hardon 2010-02-19 22:01:51 (13 views) I wish someone will do this with the depo's soon. - jason sowers 2010-02-19 21:42:46 (17 views) I get back from SE.Asia on Monday. Maybe I'll tackle this in the next week or so. I'll do plenty of - PKmode 2010-02-19 21:49:07 (34 views) or track down a bunk set of ballast. - jason sowers 2010-02-19 21:29:56 (16 views) good idea but still, no one will ever see that anyways. - PKmode 2010-02-19 21:35:00 (19 views) How about pics of before and after light diffusion? I have a set I've been sitting on and will be - PKmode 2010-02-19 21:22:29 (39 views) nice writeup, thanks. - noneckjo 2010-02-19 21:20:11 (39 views) Much brighter. - Rican_s4 2010-02-19 21:20:36 (23 views)
Vogtland GTs from Startup Racing - do I need H-sport sway bar rear AND front or just rear for track - S4-Richmond 2010-02-19 20:59:05 (67 views) Both....on GT's I run the rear on soft. That makes the rear plenty light. - QCRAZY 2010-02-19 21:47:23 (15 views) I run diff suspension but both sways and love it. My car turns in nicely and I can easily get the - PKmode 2010-02-19 21:09:51 (53 views) Thx - I will plan on the H-sport bars - just need some bigger brakes - S4-Richmond 2010-02-19 21:18:52 (14 views) stop, turn, go should be the mod order but most do it opposite as power is the fun part. - PKmode 2010-02-19 21:36:57 (13 views) Most don't track their cars, so upgrading the brakes becomes - Flyboy 2010-02-21 07:20:12 (11 views) no, but approaching 100mph during a FATS run sure does make having good stopping power - TwentyValve 2010-02-22 13:51:49 (6 views) Brakes are also stupid expensive and unsatisfying - 11 sec to 120mph, 1.8 sec to 0mph - S4-Richmond 2010-02-19 22:08:46 (28 views) Unsatisfying? I would disagree. Stock is unsatisfying, esp when you have to slam on - PKmode 2010-02-20 00:41:56 (26 views) your 4:1 makes a big difference too :) - TwentyValve 2010-02-19 21:13:21 (16 views) Agreed and I added that tidbit of info but to be honest, the power off oversteer is MUCH more - PKmode 2010-02-19 21:25:44 (43 views) I should add I have VERY stiff springs (950/1050). Surprisingly still comfortable enough for DD and - PKmode 2010-02-19 21:51:59 (30 views) ^^^ Assuming Ohlins or similar? - Justin:NorCal 2010-02-20 18:26:37 (8 views) Penskes, not adj in dampening but I'm used to a stiff susp. I also have other DD options. - PKmode 2010-02-20 22:33:10 (8 views) some may disagree, but... - TwentyValve 2010-02-19 21:02:31 (77 views)

Page: <<< | 1 | ... | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | ... | 20 | ... | >>>

5567 threads in 112 pages

You must be registered and logged in to post. Please select an option:

List of Supporters!	©2009 QuattroWorld - All rights reserved By using this site you are agreeing to QuattroWorld's Terms of Use and Privacy Policy	Powered by Kawf

The QuattroWorld website is not affiliated with or endorsed by Audi AG or Audi of America, Inc. Audi^TM, Quattro^TM, Avant, Tiptronic, FrontTrak, A2, A3, A4, A6, A8, S3, S4, S6, S8, TT, TT-S, R8, RS4, RS 6, Q7, Q5 and allroad quattro are trademarks of Audi AG.