quattroworld.com Forums: Updated parts list:

All messages | Search Forums | Return to UrS4/UrS6/S2/RS2

Updated parts list:
Posted by: oldgreen (22557) on 2014-10-29 12:35:14 In Reply to: Deathwobble at speed posted by oldgreen on 2014-10-28 15:13:46	Share \| Report

TRW lower control arms both sides.
Moog Tie rod assemblies, both side. Was going to just order the ends, but its under 50 for the whole assembly.
VAG OEM bolts and hardware.
Subframe bushings and bolts. Need to look into brand, does it matter?

This will be my initial order. I plan on testing the steering stabilizer today while taking a look at things. ALso going to look for broken Steering rack mounts.

After I get everything installed, off to the alignment shop. I will post pics of the install. It's all new to me hehe!

Thanks again everyone who gave advice. I really appreciate it!

Thread:

Deathwobble at speed - oldgreen 2014-10-28 15:13:46 (434 views)
- Updated parts list: - oldgreen 2014-10-29 12:35:14 (275 views)
- yeah jeep DW sucks, my cherokee had it bad. - running_cold924 2014-10-29 10:03:17 (257 views)
  - Thank you! I will order sub bushings as well. - oldgreen 2014-10-29 12:24:27 (237 views)
- I had somewhat of a similar issue. The good folks here said get under the car and inspect! Turned - belliss 2014-10-28 22:50:45 (305 views)
  - Scary stuff! I have a feeling when I find the roo0t cause it may be an eye opener. - oldgreen 2014-10-29 12:25:39 (269 views)
  - The subframe and the subframe mounting bolts? - UrS4boy 2014-10-28 23:22:39 (246 views)
    - Hmmm, we've heard of that before. : > ) But, I'm not sure about only finger tight. - scarman 2014-10-29 11:09:39 (234 views)
      - Any preference on subframe bushings? - oldgreen 2014-10-29 12:26:48 (240 views)
        
        The important bushings are part of the control arm inner attachment. The performance of - scarman 2014-10-29 12:48:15 (309 views)
- IME tie rods are usually the culprit of this type of wobble, my 2 cents. I would start there. - Broncoman75 2014-10-28 17:49:08 (291 views)
  - Tie rod ends and control arms are on my to do list. - oldgreen 2014-10-29 12:27:39 (254 views)
- I think you are on the right track as far as previous experience goes. The control arms were the - scarman 2014-10-28 17:19:41 (338 views)
  - Thank you! - oldgreen 2014-10-29 12:29:26 (225 views)
- I got all Audi bolts/nuts. They're all spec and exactly what you want. Also, there are two sleeves - UrSobsessed 2014-10-28 17:01:39 (315 views)
  - The sleeves are 4A0 399 413 A. I would do my best to remove the sleeves without damage. The - scarman 2014-10-28 17:47:07 (419 views)
    - Thanks a bunch for the advice! - oldgreen 2014-10-29 12:30:47 (242 views)
- Tighten your lugnuts first. - Cash68 2014-10-10 07:29:12 (274 views)
  - Does your car look like this - dustovich 2014-10-28 16:07:48 (448 views)
    - Lol! - oldgreen 2014-10-28 16:18:54 (298 views)
      - could be a wheel bearing. I had a rather large jutter on a sweeper at 80mph. It was a wheel bearing.  -  mtg  2014-10-28 17:00:03 (309 views)
        
        Judder.   -  Quattro_JC  2014-10-28 18:03:33 (252 views)
        
        on a sweeper.   -  UrSobsessed  2014-10-28 20:00:07 (250 views)
        
        Thanks!  -  oldgreen  2014-10-28 17:12:01 (274 views)
      - Where are you located US/Can - dustovich 2014-10-28 16:31:39 (288 views)
        
        US - oldgreen 2014-10-28 17:13:48 (291 views)

You must be registered and logged in to post. Please select an option:

All messages | Search Forums | Return to UrS4/UrS6/S2/RS2

Copyright © VerticalScope Inc. All rights reserved.

quattroworld.com is an independent Audi enthusiast website owned and operated by VerticalScope Inc. Content on quattroworld.com is generated by its users. quattroworld.com is not in any way affiliated with Audi AG.