quattroworld.com Forums: Not sure why someone drew that diagram then. It only serves to confuse

All messages | Search Forums | Return to UrS4/UrS6/S2/RS2

Not sure why someone drew that diagram then. It only serves to confuse
Posted by: urs6Josh (10020) on 2015-02-23 09:01:38 In Reply to: Why would you need to drill the inserts as they have vents in the bottom? You drill the housing. posted by Thuppu on 2015-02-22 23:36:22	Share \| Report

Thread:

Another round of cold, another blown Bilstein front strut - urs6Josh 2015-02-21 16:38:42 (385 views)
- I'm replacing a blown one this weekend. - Mcstiff 2015-02-21 23:36:05 (295 views)
- Ten years of winters at least that cold and only one blown Bilstein in that time. - ThetaTau87 2015-02-21 23:00:19 (295 views)
- did you drill a hole in the bottom of the strut housing to let water drain out? - audipete 2015-02-21 21:50:14 (357 views)
  - ^ this. - Cash68 2015-02-23 11:25:03 (204 views)
  - No, but it shouldn't matter. The cartridge is separate from the housing - urs6Josh 2015-02-21 23:34:42 (284 views)
    - If you use HD upside down cartridges, then the drain holes matter. See inside... - Thuppu 2015-02-22 05:04:20 (414 views)
      - That diagram makes sense. Drilling the strut housing does not  -  urs6Josh  2015-02-22 09:08:11 (286 views)
        
        No, the illustration is showing drilling the strut housing. The insert is shown fitting tightly in  -  scarman  2015-02-22 12:07:37 (326 views)
        
        No, that is not what the drawing shows.  -  urs6Josh  2015-02-22 17:48:24 (267 views)
        
        Why would you need to drill the inserts as they have vents in the bottom? You drill the housing.   -  Thuppu  2015-02-22 23:36:22 (235 views)
        
        Not sure why someone drew that diagram then. It only serves to confuse   -  urs6Josh  2015-02-23 09:01:38 (232 views)
        
        Thuppu is sorry he tried to help. If you feel there is no information in this thread useful for any  -  scarman  2015-02-23 11:33:07 (271 views)
        
        I appreciate the help.   -  urs6Josh  2015-02-23 12:39:49 (289 views)
        
        Actually this last edited diagram explains perfectly well what was happening with my car. Thank you!  -  KBATTPO  2015-02-23 13:46:10 (242 views)
        
        What were the symptoms? I'm having a hard time figuring out how ice forms inside the strut  -  ThetaTau87  2015-02-23 18:42:20 (212 views)
        
        In my case the car would become all but impossible to drive at negative (�C) temperatures.   -  KBATTPO  2015-02-23 20:29:47 (296 views)
        
        It seems that drilling the strut housing is a bandaid for missing bellows and bad gland nut seals.  -  ThetaTau87  2015-02-23 23:38:29 (228 views)
        
        Yes, but the seals just fail fast. You have to change them every year, and you still...  -  Thuppu  2015-02-24 00:04:40 (204 views)
        
        I've been using them for 10 years and over 130k miles without the issues you describe.  -  ThetaTau87  2015-02-24 11:37:46 (219 views)
        
        Thats really good for you. You have been lucky. One of mine froze after about 20k km.  -  Thuppu  2015-02-24 14:59:32 (178 views)
        
        I now zip-tie the bellows on the lower plastic cap for a good measure.   -  KBATTPO  2015-02-24 12:26:42 (166 views)
        
        I agree it does not look like it, but if you look where the drawing is marked "water goes in here",  -  scarman  2015-02-22 17:58:49 (235 views)
        
        Either way, I fail to see how water in the bottom could cause a blown damper.  -  urs6Josh  2015-02-23 09:05:12 (247 views)
        
        I agree. Ice inside the damper would cause symptoms like KBATTPO described.  -  ThetaTau87  2015-02-23 23:50:09 (174 views)
        
        Road debris certainly would destroy the seal though. The winter salt and sand is not good on it.  -  GreenMachine  2015-02-23 10:06:07 (208 views)
    - The bellows fit perfectly with Bilsteins if you have the correct parts. - ThetaTau87 2015-02-22 00:44:26 (363 views)
      - I don't run bellows, but I wash my car often. - Cash68 2015-02-23 11:27:02 (196 views)
      - How long has your bellows lasted. My bellows are destroyed after like 5 months. Both sides.   -  dustovich  2015-02-22 10:46:45 (279 views)
        
        you must have found some Meyle brand bellows. I have no problems with the Febi brand.   -  scarman  2015-02-22 14:54:35 (258 views)
        
        I'm pretty sure they were oem   -  dustovich  2015-02-22 15:59:30 (209 views)
        
        Do you have the lower boot cap? The bellows could be stretched too far w/o them.   -  ThetaTau87  2015-02-22 16:03:32 (229 views)
        
        Yep. They weren't stretched when I put them on  -  dustovich  2015-02-22 21:13:57 (237 views)
        
        They have been on for 2 years and 15k miles and still look perfect.   -  ThetaTau87  2015-02-22 12:51:49 (221 views)
  - Thanks for the tip! Will do that when the next opportunity presents itself. - KBATTPO 2015-02-21 22:03:04 (296 views)
- The PO of my new UrS included the two fronts, one of which is blown (he replaced with KYB)... - PRY4SNO 2015-02-21 20:51:54 (318 views)

You must be registered and logged in to post. Please select an option:

All messages | Search Forums | Return to UrS4/UrS6/S2/RS2

Copyright © VerticalScope Inc. All rights reserved.

quattroworld.com is an independent Audi enthusiast website owned and operated by VerticalScope Inc. Content on quattroworld.com is generated by its users. quattroworld.com is not in any way affiliated with Audi AG.