quattroworld.com Forums: No difference in temp, the DV does seem to flutter. It now does hit close to 20, then drops off..

All messages | Search Forums | Return to TT Mk1

No difference in temp, the DV does seem to flutter. It now does hit close to 20, then drops off..
Posted by: blackfnTTruck (2077) on 2017-07-29 20:30:19 In Reply to: When my was leaking this badly, I could hear the pressure dumping... posted by ArTT Vandelay on 2017-07-29 18:36:42	Share \| Report

to about 10.

Thread:

Sorry to post about this again, low boost condition, ..... - blackfnTTruck 2017-07-25 06:35:20 (210 views)
- Here is a log of the N75, why is the duty cycle at 100%, seems to be dumping boost... - blackfnTTruck 2017-07-29 15:10:12 (209 views)
  - When my was leaking this badly, I could hear the pressure dumping... - ArTT Vandelay 2017-07-29 18:36:42 (160 views)
    - No difference in temp, the DV does seem to flutter. It now does hit close to 20, then drops off.. - blackfnTTruck 2017-07-29 20:30:19 (154 views)
  - Wait, maybe I have it backwards...100% is wastegate closed? - blackfnTTruck 2017-07-29 15:34:16 (158 views)
    - Yes 100% N75 DC is no airflow to the wastegate - at least that's what the ECU is requesting - Doooglasss 2017-07-31 12:03:02 (150 views)
- Check the hose that goes from the top of the inlet pipe... - ArTT Vandelay 2017-07-28 12:36:09 (175 views)
  - I think that is the hose I have blocked off with the relocation setup.....shown here... - blackfnTTruck 2017-07-28 20:11:28 (185 views)
    - With the DV relocation we have to reverse the DV valve too, right? Did you try it both ways? - Mr.Ramsey (Gr�nTT) 2017-07-29 12:20:23 (142 views)
      - You mean the stock one? Always have had it in the same way. - blackfnTTruck 2017-07-29 13:05:13 (150 views)
        
        Here is a recent log, I did find the IM bolts were not torqued to spec, seems better.... - blackfnTTruck 2017-07-29 13:08:52 (212 views)
  - Will check that...thanks - blackfnTTruck 2017-07-28 15:07:08 (148 views)
- UPDATE>>>car has been SOLD - everso 2017-07-28 11:21:13 (231 views)
  - Ha....never !! Not done with it yet !! - blackfnTTruck 2017-07-28 15:05:48 (150 views)
- UPDATE>>>car back, the tech did pinch off the line to the DV and the boost came back up. - blackfnTTruck 2017-07-28 09:54:07 (177 views)
  - What DV are you running? - TCU_TT 2017-07-29 18:24:26 (175 views)
    - It's a hyperboost, I think, I did clean and regrease, and did try my original stock DV - blackfnTTruck 2017-07-29 20:29:25 (144 views)
- UPDATE>>> looks like I'm on my own, they said since it's tuned, they can't fix it.. - blackfnTTruck 2017-07-27 12:02:53 (210 views)
- UPDATE>>>>log of pressure...here is a log I did before taking it back to the dealer.... - blackfnTTruck 2017-07-26 14:41:29 (236 views)
  - Here is an older log, before the issue...............much quicker and closer to the same pres.. - blackfnTTruck 2017-07-26 15:08:33 (230 views)
    - That even looks like a lot of lag for a k04... shoot me an email. Your QW address doesn't work - Doooglasss 2017-07-27 12:44:20 (190 views)
      - Could we be ignoring a waste gate issue?   -  J. Patterson  2017-07-27 14:10:27 (180 views)
        
        Not ignoring it, anything is possible. I do have the Max spring mod on it, to help hold it...  -  blackfnTTruck  2017-07-27 17:40:21 (187 views)
        
        Could something in the wastegate be "in a bind", or rubbing/hitting something?   -  Gokart3  2017-07-28 11:57:10 (160 views)
        
        the WG would have to be in a bind OPEN to cause a low boost issue >  -  Doooglasss  2017-07-31 12:05:55 (137 views)
        
        I did do that and all works fine. Beginning to think I have an issue with the flapper seal.   -  blackfnTTruck  2017-07-31 14:19:47 (147 views)
        
        That is on my list to check, now that I have the car back. Although the dealer did pressure..  -  blackfnTTruck  2017-07-28 15:09:47 (169 views)
- Hardware or Software ... going to need a log > - Doooglasss 2017-07-26 08:03:13 (201 views)
  - OK...thanks....still at the dealer right now, so could the dip stick tube or a poor connection... - blackfnTTruck 2017-07-26 08:13:13 (263 views)
    - SAI is a separate system entirely > - Doooglasss 2017-07-26 10:28:04 (218 views)
      - The manifold gaskets are both there, I have a phenolic spacer and the TB gaskets....  -  blackfnTTruck  2017-07-26 11:19:34 (204 views)
        
        follow up >  -  Doooglasss  2017-07-26 11:44:13 (195 views)
        
        Yes...BEA...really appreciate all your help, they have it now, but have not figured it out yet....  -  blackfnTTruck  2017-07-26 12:04:51 (179 views)
        
        That red turbo discharge pipe can leak and be difficult to hear when pressure testing.  -  J. Patterson  2017-07-26 11:26:02 (200 views)
- So ever since you had said shop do the repairs, this has been happening? - VelveTTrevolvr 2017-07-25 15:40:22 (176 views)
  - It is with them right now, we'll see if they can find the issue, I have my doubts..... - blackfnTTruck 2017-07-25 16:54:53 (204 views)
    - Not far off -- the dipstick tube was a vacuum failure point on CIS VW's. Would throw off fueling - Doooglasss 2017-07-26 07:56:18 (168 views)
      - So it could be part of the boost issue?   -  blackfnTTruck  2017-07-26 08:02:16 (221 views)
        
        would only impact vacuum and I'm not even sure on newer cars it matters as much >  -  Doooglasss  2017-07-26 10:25:37 (197 views)
        
        My manifold has three of those clip on connectors, I thought one was not on far enough..   -  blackfnTTruck  2017-07-26 11:25:56 (199 views)
        
        Could your diverter valve be partly stuck open? >  -  gortt  2017-07-27 19:40:23 (159 views)
        
        I did replace the DV with my original stock one, bypassd the N75 with my MBC....  -  blackfnTTruck  2017-07-27 20:10:46 (181 views)
- Pressure test the hose between the N75 and waste gate...>> - RobertA3 2017-07-25 06:56:45 (211 views)
  - All the 100% duty cycle indicates is that the car is not getting to the requested boost > - Doooglasss 2017-07-31 12:07:05 (134 views)
  - But doesn't that hose help the spring to keep the wastegate CLOSED? ---- - J. Patterson 2017-07-25 11:27:09 (197 views)
    - Yup... - Modshack.info 2017-07-25 15:46:34 (200 views)
      - That does make sense...thanks guys. - blackfnTTruck 2017-07-25 16:55:38 (162 views)
  - Thanks, I'll check that out. - blackfnTTruck 2017-07-25 09:14:16 (170 views)

You must be registered and logged in to post. Please select an option:

All messages | Search Forums | Return to TT Mk1

Copyright © VerticalScope Inc. All rights reserved.

quattroworld.com is an independent Audi enthusiast website owned and operated by VerticalScope Inc. Content on quattroworld.com is generated by its users. quattroworld.com is not in any way affiliated with Audi AG.