quattroworld.com Forums: TT Mk1

Forum Tips \| Search Forums \| Post New Thread	Tracked threads
Page: <<< \| 1 \| ... \| 4 \| 5 \| 6 \| 7 \| 8 \| 9 \| 10 \| 11 \| 12 \| ... \| 20 \| ... \| >>>	7422 threads in 149 pages

Drivers seat has 3 connector under seat: yellow, green, and RED (not on passenger side)??? - TTQ2K2 2010-02-23 14:08:51 (39 views) Removing belt catch from drivers seat is major PIA. any diys for getting at cable that snakes - TTQ2K2 2010-02-23 15:20:04 (20 views) You should be able to fish it out without much trouble....> - Modshack.info 2010-02-23 15:27:22 (43 views) That's what I thought but seems they're behid that big plastic plate on the seat base and - TTQ2K2 2010-02-23 17:32:28 (14 views) You may be able to pop that plate off......> - Modshack.info 2010-02-23 17:34:38 (16 views) the seatbelt latch connector needs to be connected or you will get an airbag light. - BluHeaven 2010-02-23 14:14:57 (36 views) thanks much! - TTQ2K2 2010-02-23 14:24:06 (21 views) yes. aftermarket seats but using old oem seatbelts. - TTQ2K2 2010-02-23 14:20:51 (26 views) yes! - BluHeaven 2010-02-23 14:31:55 (21 views) Yes! - Modshack.info 2010-02-23 14:21:59 (53 views) 3 plugs...>> - Modshack.info 2010-02-23 14:12:35 (91 views) What kind of switches did you have in that middle console? - Room4Tu 2010-02-23 15:16:19 (20 views) They were for....>> - Modshack.info 2010-02-23 15:17:19 (32 views) Why none for passenger side..services both? Do I need to bridge any of the connectors? - TTQ2K2 2010-02-23 14:14:44 (23 views) That pic is my passenger side......> - Modshack.info 2010-02-23 14:17:51 (29 views) None on passenger side and receptical bracket on bottom of seat is blank where the red one - TTQ2K2 2010-02-23 14:23:02 (26 views) Odd.....Mine was an 11/00 build. - Modshack.info 2010-02-23 14:24:04 (21 views) I was robbed. Some one owes me a red plug or audi didn't give a rats patoot if seat belt was - TTQ2K2 2010-02-23 14:26:52 (25 views) lol... - PRIMER 2010-02-23 14:42:01 (17 views) Yeah...all that means is...>> - Modshack.info 2010-02-23 14:45:31 (31 views) Note to self.: keep p-bag off when little misses is not in car. - TTQ2K2 2010-02-23 15:22:39 (18 views) On the other hand...> - Modshack.info 2010-02-23 15:29:04 (28 views) no kidding really... AG is irreplaceable!!! - PRIMER 2010-02-23 15:42:11 (19 views) My little LZ7W is not going anywhere...;-) Finding spouse was much easier. - TTQ2K2 2010-02-23 17:01:34 (16 views)
PSA/OT: A little light reading...> - Modshack.info 2010-02-23 14:06:56 (167 views) I get 3-4 Mouser catalogs every quarter, and never even look at them... The web site makes it SO - MCPaudiTT - DEFCON1 2010-02-24 02:58:02 (5 views) Dunno...I just refer people to the appropriate page.......> - Modshack.info 2010-02-24 10:10:59 (7 views) excellent bathroom reading, but my wife won't think so :D - audiboy 2010-02-23 14:55:37 (10 views) Their stuff is way marked up price wise, but typically you can order in small qty. - CarTToonDog1 2010-02-23 14:23:53 (13 views) Personally I don't find their pricing out of line on most items.....> - Modshack.info 2010-02-23 14:36:10 (31 views) USPS should get stuff from Atlanta to your house in 2 days... - bubba 2010-02-23 15:55:49 (9 views) They ship FedeX to me...>> - Modshack.info 2010-02-23 15:57:53 (16 views) ...and the DIY is??? Building a Modshack global communications system? ;-) - TTQ2K2 2010-02-23 14:11:01 (11 views) Dunno....gotta cruise the catalog!.....> - Modshack.info 2010-02-23 14:16:31 (19 views) did they send you that as a thank you for ordering so much stuff? ;-) - nikhil 2010-02-23 14:09:47 (14 views) Yeah...You have to be a regular customer to get the catalog......> - Modshack.info 2010-02-23 14:15:19 (23 views) That one plus the MSC catalog will keep you in bathroom reading for yearz>> - VARATECK 2010-02-23 14:20:46 (18 views) I have all the time in the world...>> - Modshack.info 2010-02-23 14:22:58 (27 views)
......and the final blue - ITTALSKIER 2010-02-23 13:06:43 (169 views) TT 2+2 WoW - TT AGOGO 2010-02-23 14:31:21 (10 views) slap two more doors on it and it will out sell the Panamera. certainly better looking. - TTQ2K2 2010-02-23 14:12:27 (10 views) LOLOL agree..... - ITTALSKIER 2010-02-23 14:24:25 (7 views)
Max front camber/caster with plates at stockish height? - madmax199 2010-02-23 12:45:55 (86 views) I get about -2.5 with the old 2bennett plates - ArTT Vandelay 2010-02-23 17:14:45 (41 views) ArTT Vandelay - madmax199 2010-02-23 20:03:14 (45 views) very interested to see this. - ArTT Vandelay 2010-02-23 22:38:23 (33 views) I got these things mounted and tested today - madmax199 2010-02-24 21:26:58 (17 views) Already been done by Neuspeed - for normal MKIV's which don't have slotted arms - rasTTa 2010-02-23 23:19:06 (37 views) That would not work on a tt arm! - madmax199 2010-02-23 23:45:34 (29 views) Hence the statement "for normal MKIV's which don't have slotted arms" - rasTTa 2010-02-24 09:08:45 (20 views) For autocross I like to start with at least -3 degrees of camber - madmax199 2010-02-23 13:33:11 (63 views) srs question: how do you know this to be true? - bubba 2010-02-23 15:19:26 (45 views) yes you do. Even with street tires. We have to use sprayers to cool down the tires if it is a 2 - audiboy 2010-02-23 16:53:39 (45 views) on a one minute course? - bubba 2010-02-23 18:08:42 (40 views) even less than 60 seconds... - audiboy 2010-02-23 20:13:12 (40 views) Which pads? Bobcat or AX6? - bubba 2010-02-24 10:56:58 (18 views) AX6. less than 1000miles, but worth it. Although looking at bigger braking solutions now, so I - audiboy 2010-02-24 14:41:46 (18 views) Cool video - madmax199 2010-02-23 20:25:45 (34 views) you probably know him since you also have an Evo :) - audiboy 2010-02-23 20:58:51 (33 views) what class? You can't do that in CSP. Street Mod, yes - and you can use the arms from Nikhil.. - audiboy 2010-02-23 14:51:22 (38 views) You'll never get more than -3 degrees with the GC plates - unless you drop your car alot which - rasTTa 2010-02-23 13:02:04 (62 views) Sounds like the solution in this case is - nikhil 2010-02-23 14:07:12 (55 views) good - madmax199 2010-02-23 14:27:09 (50 views) just let me know if you're interested in the arms - nikhil 2010-02-23 14:32:33 (50 views) Or you can shift the subframe forward......> - Modshack.info 2010-02-23 14:30:57 (49 views) Why are you planning to run that much? I'm at -1.3 up front and that seems optimal based on - bubba 2010-02-23 13:01:16 (65 views) Depends on type of tire, how you are measuring temps, and air pressure.... - rasTTa 2010-02-23 17:25:29 (39 views) I take heat readings with a probe in the hot pits. - bubba 2010-02-23 18:07:54 (35 views) If this will be a dedicated track/autoX car, 3 degrees is conservative... - audiboy 2010-02-23 14:54:59 (43 views) Good question. Seems excessive. - Modshack.info 2010-02-23 13:23:16 (47 views) No way...> - Modshack.info 2010-02-23 12:49:56 (117 views) Steve, are you saying that on the TT, the GC scale is wrong and -1.8 indicated is only -0.8 actual, - Late_Apex 2010-02-23 12:55:50 (61 views) Like Joe said..\/....Add stock number to the GC range for the approx. max. - Modshack.info 2010-02-23 13:22:29 (47 views) I have the GC plates - my ball joints are maxed and I'm near maxed on the GC plates and am at -2.5 - rasTTa 2010-02-23 13:00:08 (66 views) If front camber is ball joint limited, maybe Nikil should consider a canted ball joint mount - Late_Apex 2010-02-23 13:39:00 (51 views) Camber is limited also by suspension design - these cars were never designed for alot of negative - rasTTa 2010-02-23 14:06:14 (51 views) Yeah...It's hardly a sophisticated design....F or R - Modshack.info 2010-02-23 14:08:45 (43 views) what's the issue with the rear suspension? - nikhil 2010-02-23 14:08:37 (43 views) No toe correction - toe changes dramatically with camber and height changes - which is why it is - rasTTa 2010-02-23 14:16:39 (49 views) but once it's dialed in, it's not so bad ;-) - nikhil 2010-02-24 11:39:56 (17 views) It works - just not very well - the MKV chassis design is far superior - rasTTa 2010-02-24 11:49:32 (18 views) we just need a way to bolt-up the Mk5 subframes to the car ;-) - nikhil 2010-02-24 11:59:35 (15 views) LOL - i'm just gonna wait for a Golf R..... - rasTTa 2010-02-24 13:40:07 (19 views) that should be great! in the interim, I'll get to work on the subrame adaptation ;-) - nikhil 2010-02-24 13:45:37 (14 views) If anyone can do it - i'd put my money on you :-) in the interim - i'm going to track the daylights - rasTTa 2010-02-24 14:02:04 (17 views) what do you mean? - nikhil 2010-02-23 13:43:59 (47 views) If the ball joint can not angle any more toward the car because it is at the limit of its travel, - Late_Apex 2010-02-23 13:58:45 (49 views) I don't think it's that simple - nikhil 2010-02-23 14:05:01 (48 views) The tilting of the ball joint mount would not be intended to create more camber, only to allow - Late_Apex 2010-02-23 14:11:43 (46 views) I don't think ball joint bind limits camber... - nikhil 2010-02-23 14:13:43 (48 views)
.....a blue header for you - ITTALSKIER 2010-02-23 12:43:02 (110 views) Very nice Sal! - Blue TTop 2010-02-23 12:56:07 (13 views)
Front seat removal: Bentley say install adaptor to prevent seat airbag from deploying when - TTQ2K2 2010-02-23 12:02:04 (59 views) I took my seats out with no plug last fall for a thorough interior cleaning without any issues. - SparTTan 2010-02-23 17:33:33 (16 views) I wouldn't worry about it......>> - Modshack.info 2010-02-23 12:28:45 (66 views) Thanks doc. any reason I shouldn't disconnect and then slap - TTQ2K2 2010-02-23 12:40:08 (42 views) LOL.....>> - Modshack.info 2010-02-23 12:45:30 (42 views) Glad I made you laugh. :-) Cheers. - TTQ2K2 2010-02-23 12:48:34 (19 views) adapter - bent wire. - David_TT225QC 2010-02-23 12:03:46 (23 views) Can you expand on this? - TTQ2K2 2010-02-23 12:16:22 (20 views) adapter- resistor, 4.7 ohms, 1/4 W - max. (1/2 w, sure, OK) - JustJeff 2010-02-23 12:13:58 (27 views) Yes, I'm FOS, I forgot about the resistor part, thanks for the correction! - David_TT225QC 2010-02-23 12:30:23 (19 views) Pay attention! - Modshack.info 2010-02-23 12:33:11 (18 views) I have 4.7 ohm risistors for the "car" end of the clip. Need them for the seat end too?? - TTQ2K2 2010-02-23 12:17:16 (21 views)
Anyone remove their stock intercooler cross tube? - Late_Apex 2010-02-23 09:08:05 (26 views) Don't - Modshack.info 2010-02-23 10:18:48 (28 views) ...as in do not? - Room4Tu 2010-02-23 15:07:13 (9 views) +1.........> - Modshack.info 2010-02-23 15:09:49 (32 views) Word - roady 2010-02-23 14:46:04 (6 views) it is structrurally needed.....if you remove it, you need to replace it>>> - TTinCT 2010-02-23 09:30:41 (77 views)
turns out im not the only one.. (tt content) - murTTer 2010-02-23 08:52:17 (132 views) Check the hose to the brake booster....>> - RoberTT 2010-02-23 12:17:13 (32 views) sounds like Sharon modified your car.....;-) - TTinCT 2010-02-23 12:45:43 (13 views) does, don't it...:-) - RoberTT 2010-02-23 13:19:44 (12 views) Go, Stop, Go, Stop...Wha? It needs gas? - Modshack.info 2010-02-23 13:32:22 (11 views) It's always something...-) - RoberTT 2010-02-23 14:27:37 (7 views) ill check it, but haven't had any brake issues. - murTTer 2010-02-23 12:39:14 (8 views) This might be too old school but when that condition occurs on one of my classics I use - David_TT225QC 2010-02-23 11:00:18 (37 views) its been pressure tested, no leaks found. - murTTer 2010-02-23 11:39:45 (10 views) clogged suction jet in the PCV plumbing can give fluctating idle without a boost leak - JohnLZ7W 2010-02-23 10:12:34 (13 views) ok, but.. - murTTer 2010-02-23 10:16:36 (36 views) Hmm, no that sounds different. Have you ruled out a flaky TB or throttle position sensor? - JohnLZ7W 2010-02-23 11:39:48 (11 views) changed TB 3 times.. - murTTer 2010-02-23 11:51:46 (19 views) changed with a new OEM TB? - TTinCT 2010-02-23 13:05:26 (9 views) tried new and used. - murTTer 2010-02-23 13:49:17 (9 views) humor me here.....which ones went in when and how long did each work? - TTinCT 2010-02-23 13:52:03 (8 views) shop did it.....> - murTTer 2010-02-23 14:01:28 (16 views) It's a drive by wire car. Check all the throttle connections from the TB down to the pedal. - BluHeaven 2010-02-23 12:57:05 (16 views) that's the direction I've been leaning, but..... - murTTer 2010-02-23 13:11:52 (14 views) do you have bentley on CD or book? I think one of them has wiring diagrams - JohnLZ7W 2010-02-23 13:25:11 (10 views) I've got the cd. but have mac, don't wanna run parallels..friend has pc tho so ill check it on there - murTTer 2010-02-23 13:52:20 (8 views) No, it is definitely you - BlewChip 2010-02-23 09:49:57 (15 views) I might have had a different probelm >> - as350 2010-02-23 09:03:24 (42 views) That little vacuum line under the intake manifold blew off twice giving me the same symptoms. - fredfromny 2010-02-23 09:27:53 (12 views) I have heard that before as well.... - murTTer 2010-02-23 09:12:53 (34 views) Link to parts list and write-up >> - as350 2010-02-23 11:28:50 (19 views) alright cool, thanx for the info. ill look into it. - murTTer 2010-02-23 11:54:09 (10 views)
good bye TT , rant - porttac 2010-02-23 01:50:40 (358 views) Where do you live and how much do you want for it? :) - HelloMcFly 2010-02-23 19:09:27 (40 views) Washington State - porttac 2010-02-23 19:27:04 (20 views) I wouldn't mind a road trip down to Cali, are you planning on trading it in? - HelloMcFly 2010-02-23 19:52:14 (17 views) This is a very, very confusing comment, BTW. - AxeYrCat 2010-02-23 19:59:40 (16 views) Fly to WA buy the car drive back to Cali where I live. - HelloMcFly 2010-02-24 15:26:56 (9 views) Much less confusing now, thanks! - AxeYrCat 2010-02-24 16:54:19 (6 views) That's what the guy who bought my R32 did. Brought his wife and they had a little vacation drive. - David_TT225QC 2010-02-24 15:48:10 (5 views) If I had to drive a long distance back to Cali it would def be from WA. - HelloMcFly 2010-02-24 16:20:43 (6 views) Honestly, I think your complaints were absolutely justified. - AxeYrCat 2010-02-23 19:08:12 (34 views) Thank Ax, ..on a downer, not doing anything today..still love the damn thing.. - porttac 2010-02-23 19:29:05 (14 views) It will no doubt behave beautifully until you decide you might want to keep it. ;-) - AxeYrCat 2010-02-23 19:58:46 (12 views) You're right about the crowd not being understanding. I've seen many posters (me too)... - EighTT 2010-02-23 19:12:54 (35 views) I feel your pain. Worst part of the TT is the dealers. I had airbag drama under warranty,..> - CarTToonDog1 2010-02-23 14:11:02 (40 views) if it was under warranty, why were you arguing with them? - bubba 2010-02-23 15:56:34 (19 views) NO, that is in your mind. I was not arguing with anyone. Tired of spending half of my life dealing - porttac 2010-02-23 18:29:36 (158 views) Gotta tell ya, based on your reaction in this post>>> - TTinCT 2010-02-23 21:14:15 (68 views) you make an excellent point. not my intention. - porttac 2010-02-24 10:47:58 (12 views) Sometimes, 5 new issues are created for every one resolved. - David_TT225QC 2010-02-23 17:31:57 (13 views) My TT wasn't built in Germany but in Gyor Hungary. - AudiTTMick 2010-02-23 11:10:53 (77 views) ....and if your uncle had boobs he would be your aunt - BlewChip 2010-02-23 11:41:05 (26 views) buwahahaha - TTinCT 2010-02-23 13:06:19 (17 views) lol - David_TT225QC 2010-02-23 11:47:50 (17 views) And Boxsters were built in Finland (up until this year I think) - JohnLZ7W 2010-02-23 11:38:56 (18 views) If you saw my maintenance log the other day... - EighTT 2010-02-23 10:29:48 (57 views) Oh yeah, it was detailed...waaaaa! - BlewChip 2010-02-23 11:43:05 (18 views) Toyotas may be on sale now :-P - Felino Perdido - TT 2010-02-23 09:51:24 (36 views) sounds like more of a dealer issue than a car issue - TTinCT 2010-02-23 09:27:33 (23 views) pssst. It could also be an owner issue.... - David_TT225QC 2010-02-23 11:02:10 (21 views) nah....could not be that! - TTinCT 2010-02-23 11:16:36 (18 views) No issues other than cluster. Windows . Air bag. Coil packs? - J. Patterson 2010-02-23 09:01:45 (56 views) souns like there's one variable that could have fixed a lot...... - murTTer 2010-02-23 08:56:56 (75 views) the car was purchased 12/14/06= still under warranty= going to dealership - porttac 2010-02-24 14:41:37 (7 views) I have been saying this for years... - Gomez 2010-02-23 08:06:27 (99 views) You mentioned a reliability turnaround since 2005. Here's what my experience has been... - EighTT 2010-02-23 11:41:33 (53 views) you should have driven it more.... - \|everso!\| 2010-02-23 07:11:06 (82 views) sorry to hear. please let us know if you're saying goodbye to any beautiful women. - meem 2010-02-23 02:19:24 (44 views) I've seen crack whores go through less $$$$ ;-( - fredfromny 2010-02-23 08:59:12 (28 views) Than porttac's beautiful lady friends? - AxeYrCat 2010-02-23 09:54:53 (20 views) Ha! - AxeYrCat 2010-02-23 07:43:38 (29 views) Goodbye porttac, Nice walking with your for a while... :O) - Mark 2010-02-23 01:53:18 (40 views)
going to cali - bvnguyen516 2010-02-23 01:00:51 (101 views) You realize California (NOT Cali) is a large state, right? - Seneb 2010-02-23 18:51:58 (7 views) hmm, i don't think so - OldSchoolAG 2010-02-23 08:05:30 (21 views) : ) - RUN 2010-02-23 22:45:50 (9 views) haha - TTinCT 2010-02-23 09:33:18 (14 views) was wondering if anyone would get that - OldSchoolAG 2010-02-23 13:24:06 (22 views) mid 90's >>> - TTinCT 2010-02-23 13:59:41 (18 views) where in cali, im currently in riverside - carslutt 2010-02-23 01:02:24 (17 views) Just Cali, you know, its a small state! :o) - Kingttr 2010-02-23 01:37:40 (17 views) all square 15 feet of it ahah...... - carslutt 2010-02-23 02:32:54 (19 views)
AoA Finally pays off on TB lawsuit . Hooray - BobbyH 2010-02-22 23:16:26 (90 views) Congrats, Bobby! - Mark 2010-02-23 01:05:38 (10 views)
Looking for a free lance/independent mechanic in the SF Bay area - pattreek 2010-02-22 22:49:07 (34 views) 034 motorsports in Fremont - JT932 2010-02-23 18:43:02 (3 views) Try asking Terry at Griffin Motorwerke - OWDYTT 2010-02-23 12:50:58 (6 views) Tomas Sport Tuning in Berkeley - rasTTa 2010-02-23 12:08:28 (9 views) Not sure how far you want to travel, but if Brentwood isn't too far... - AvanTTix 2010-02-23 12:08:18 (7 views) drive to riverside and ill do it ahah...... good luck - carslutt 2010-02-23 01:03:09 (4 views) Might be farther than you want to go, but I take my car to Performance Cafe here in Monterey. - Seneb 2010-02-22 23:39:56 (10 views) if you give up, 2bennett in davis isn't too far from you, and they are pro's - ArTT Vandelay 2010-02-22 22:53:43 (23 views)
ETKA anyone? 1J0 199 262BF - JohnLZ7W 2010-02-22 22:43:43 (60 views) It was printed on the plastic bag the mount was in - I noticed it right away - but it also said - rasTTa 2010-02-23 10:08:11 (70 views) WTF? So they're just selling factory Mk4 mounts? These are a downgrade from stock TT mounts - JohnLZ7W 2010-02-23 11:43:37 (42 views) The story I was given was......... - rasTTa 2010-02-23 12:13:04 (50 views) Given how worn mine are after only 20k miles I can't see how they are uprated over - JohnLZ7W 2010-02-23 12:21:16 (40 views) Did you get Stage 1 or Stage 2? - Seneb 2010-02-23 19:30:06 (22 views) Stage 1, just the motor and trans mounts for now but want to add the dogbone too - JohnLZ7W 2010-02-23 19:31:24 (22 views) Any extra vibration? Did you post a write-up that I missed? - Seneb 2010-02-23 19:40:34 (23 views) Yes there is more at idle but I'm having downpipe clearance problems right now - JohnLZ7W 2010-02-23 19:49:40 (26 views) Have you ever replaced the gasket on the DP? - rasTTa 2010-02-23 19:54:07 (28 views) No, haven't had any issues with any of the joints loosening up - JohnLZ7W 2010-02-23 22:37:20 (26 views) Of the dozen or more times I messed with my DP I came to the conclusion that - rasTTa 2010-02-24 09:19:08 (21 views) I will have the shop check it out. Where did you get the gasket? Is it a common size? - JohnLZ7W 2010-02-24 10:18:11 (16 views) Kragen - 3" copper header gasket. I'd also suggest all new hardware - with the new locking nutz - rasTTa 2010-02-24 10:43:20 (19 views) I followed your advice Joe (copper gaskets, steel locknuts)... it's working great - Russ Scott 2010-02-24 15:23:40 (18 views) Glad to hear Russ - as I'm sure you've seen I installed the new style DP - rasTTa 2010-02-24 16:02:20 (15 views) I did... cost? did 42DD offer a trade in program, old for new style? - Russ Scott 2010-02-24 19:21:02 (12 views) No trade in......... - rasTTa 2010-02-24 19:45:47 (13 views) Ok, thanks - Russ Scott 2010-02-24 19:48:34 (9 views) FWIW - rasTTa 2010-02-24 19:59:51 (12 views) thanks... I had no idea about $400/used! - Russ Scott 2010-02-24 21:55:30 (7 views) john, you sure you want that part? only audi it's ever been on is the a3 - meem 2010-02-22 23:24:24 (41 views) Thanks meem, I figured it was a common part with the 1JO - JohnLZ7W 2010-02-23 00:06:00 (56 views) correct. that part has even been on the base-model 1998 beetle. - meem 2010-02-23 00:13:08 (38 views) btw, time to stock up on total auto wash -- dd has 20% off all p21s right now - meem 2010-02-23 00:16:32 (39 views) ooh BTW, got any new Menzerna polishes that you like - JohnLZ7W 2010-02-23 00:23:32 (52 views) i use a cyclo. my polishing sessions are typically very very mild so i have no need for the ... - meem 2010-02-23 00:30:22 (50 views) I saw that, need to order some. Just about out of Mystique - JohnLZ7W 2010-02-23 00:20:32 (38 views) GenuineVWAudiparts.com says 1J0 199 262 BF = engine mount: $122.00 MSRP.... $87.84 your price - Russ Scott 2010-02-22 23:15:41 (46 views) Or you can get them from 034. Really wish I had noticed this before I installed them - JohnLZ7W 2010-02-23 00:03:38 (103 views) The density line mounts all carry the stock part numbers they were derived from, they always have. - nate@034motorsport.com 2010-02-23 12:53:04 (51 views) No there's not. I just went over the mounts several times... there is no durometer stamping on them - BluHeaven 2010-02-23 13:07:16 (44 views) you're examining the part out of the car? or while it's installed? - meem 2010-02-23 13:12:15 (29 views) Out of the car. The motor mount is easy to see the part #s but I need to disassemble - JohnLZ7W 2010-02-23 13:27:32 (36 views) out of the car.. they are sitting in a box in the garage - BluHeaven 2010-02-23 13:25:02 (28 views) I had them installed in my car, after two years they don't seem the same level of quality as OEM - JohnLZ7W 2010-02-23 12:59:49 (28 views) Has anyone ever tested the durometer of the OEM TTq 225 mounts? The mounts are much - rasTTa 2010-02-23 12:57:02 (39 views) And the rubber is much stiffer. John's 120k stock mounts were slightly stiffer than the 034 mounts - BluHeaven 2010-02-23 13:00:23 (40 views) wow. have you emailed 034 to get the story? - nikhil 2010-02-23 08:16:34 (32 views) Not yet, I wanted to get the part # off of the trans mount too but looks like Joe posted it above - JohnLZ7W 2010-02-23 11:41:45 (30 views) well, please post what they have to say - nikhil 2010-02-23 11:46:47 (34 views) If you are going to replace your dogbone - i'd suggest this one - rasTTa 2010-02-23 12:16:27 (46 views) thanks for the info - nikhil 2010-02-23 12:19:17 (34 views) The spherical is attached to the engine - the poly's to the subframe - I would think that - rasTTa 2010-02-23 12:55:57 (32 views) thanks. I may give it a shot - nikhil 2010-02-23 13:07:00 (30 views) would it surprise you to know that that part number is on the rubber of the 034 street density mount - BluHeaven 2010-02-22 23:53:51 (72 views) We still use the OE numbers on our mounts. - nate@034motorsport.com 2010-02-23 12:59:49 (40 views) where is the durometer stamped on the mount? I have only seen the part # on mine - JohnLZ7W 2010-02-23 13:26:18 (27 views) Seeing as John is my husband.... I HAVE compared them to stock. - BluHeaven 2010-02-23 13:04:55 (39 views) Awesome info. I was going to replace with 034 mounts, but not now. Thanks! - CubFan 2010-02-23 19:14:33 (22 views) Honestly I really think replacing old mounts with new factory is the best way to go - JohnLZ7W 2010-02-23 19:34:15 (28 views) No track car or shiny new mod for me... - CubFan 2010-02-23 21:48:50 (24 views) oh jeez... - Russ Scott 2010-02-23 01:19:30 (34 views) don't have etka handy but 1J0 = generic mk4 vw, and 1/99 = engine/securing parts - meem 2010-02-22 23:04:51 (57 views)
who has wheels for sale in here? need some lightweight track wheels.... - brillianTT 2010-02-22 21:21:00 (19 views) Take my fat fives and give me your LMs ; ) - arTTie 2010-02-23 16:46:47 (3 views) lol, I meant in addition to my LMs. :) - brillianTT 2010-02-24 08:54:47 (2 views)
I see everyone has moved here... wow. Engine/trans question. - CarTToonDog1 2010-02-22 18:30:44 (89 views) Welcome back. We didn't move, we just changed our address and lost our memory :-) ----> - J. Patterson 2010-02-22 18:52:00 (57 views)
%&#%! VAG - OldSchoolAG 2010-02-22 17:38:26 (156 views) Maybe it's a British Standard square bolt. ;-) If it's a Crapsman square set, it'd make perfect - Gokart3 *NSFW - Don't click!!!* 2010-02-22 19:02:26 (91 views) hehe...nah, just VAG throwing a new size into the mix - OldSchoolAG 2010-02-22 21:13:36 (27 views) M 11.82252 or something... ;) - Gokart3 *NSFW - Don't click!!!* 2010-02-23 01:47:45 (16 views) lower - RevisiTTed 2010-02-22 19:51:49 (11 views) She must be working out... her right bicep looks impressive. - Laguna 2010-02-22 19:17:09 (14 views) Well, they're never "identical"... - Gokart3 *NSFW - Don't click!!!* 2010-02-22 19:25:11 (42 views) Ha ha! - Modshack.info 2010-02-22 17:40:38 (78 views) oh, and.... - OldSchoolAG 2010-02-22 17:43:42 (73 views) LMAO! - AxeYrCat 2010-02-22 17:55:31 (20 views) :-)...I bet that's a sight! - Modshack.info 2010-02-22 17:58:44 (21 views) it is quite amusing looking - OldSchoolAG 2010-02-22 18:01:01 (41 views) lol...thx, but should be metalnerd.com (no s) - OldSchoolAG 2010-02-22 17:42:42 (22 views) Yeah...fixed...Sorry! - Modshack.info 2010-02-22 17:44:48 (18 views)
sigh...anyone have an extra front bumper lying around? - \|everso!\| 2010-02-22 17:35:54 (105 views) I have and extra with the Canadian Cancerous Tumours - DumpTTruck 2010-02-22 19:05:23 (10 views) we have a spare rear bumper... but that doesn't really help you does it ;-P - BluHeaven 2010-02-22 18:11:01 (16 views) should i try putting it on the front? - \|everso!\| 2010-02-22 18:12:55 (10 views) Only if you had a roaster.....>> - Modshack.info 2010-02-22 18:17:10 (57 views) Ha, true story. Those silly roadster folks... :o) - Kingttr 2010-02-22 20:35:06 (10 views) Oh... Dang.. Sorry, Syed. I'll give you one for free if you buy my car! - AxeYrCat 2010-02-22 17:37:47 (12 views) that's a great deal. i'll take it! - \|everso!\| 2010-02-22 17:42:04 (35 views) My spare front bumper went to the dump.....>>> - Modshack.info 2010-02-22 17:46:04 (78 views) Please???? - AxeYrCat 2010-02-22 17:54:58 (14 views) You know...>> - Modshack.info 2010-02-22 18:00:21 (74 views) Or store it by me until the 911 sells - rdrocktt 2010-02-22 20:44:47 (24 views) & rent it out @ TTEast. ;^) - MaxHedrm 2010-02-22 18:23:12 (11 views) There's a plan...Thrill ride down the Dragon, $20! - Modshack.info 2010-02-22 19:16:21 (10 views) psst.... - \|everso!\| 2010-02-22 18:07:46 (57 views) LOL....:-) - Modshack.info 2010-02-22 18:08:23 (45 views)
Went to change the oil Saturday at a local shop and... - RevisiTTed 2010-02-22 16:01:51 (215 views) stop eating lead paint chips aha........ - carslutt 2010-02-22 20:29:47 (12 views) You've really let yourself go, haven't you? lol - BTTI 2010-02-22 17:25:18 (20 views) Jabba the Hut - RevisiTTed 2010-02-22 17:28:52 (16 views) Does this car make me look fat? - bubba 2010-02-22 17:03:22 (19 views) LOL! - RevisiTTed 2010-02-22 17:04:37 (18 views) Must have been your new braces - BlewChip 2010-02-22 16:47:56 (18 views) They do feel heavy - RevisiTTed 2010-02-22 17:01:02 (39 views) Great weight loss plan though. - MaxHedrm 2010-02-22 18:27:27 (16 views) Yeah, that is for sure - RevisiTTed 2010-02-22 18:41:11 (16 views) You should have thanked the guy for being concerned....> - Modshack.info 2010-02-22 16:38:09 (74 views) I had to buy one of those aluminum racing floor jacks to fit under my lowered bunny! - Gomez 2010-02-22 20:19:53 (13 views) Would you trust a quick lube place to do an engine flush? - RevisiTTed 2010-02-22 17:35:26 (48 views) No. - Modshack.info 2010-02-22 17:39:05 (42 views) Yeah, I gave him a beer out of my trunk. He thanked me then lit up his unused joint. - RevisiTTed 2010-02-22 16:47:45 (27 views) You should have got out asked him to help push it into place - TCU_TT 2010-02-22 16:28:06 (41 views) Oh yeah, I looked - RevisiTTed 2010-02-22 16:31:22 (24 views) uhmmmm....... Yes, gaining weight WILL make a difference on front end clearance. - BluHeaven 2010-02-22 16:25:39 (63 views) LOL...speaking from experience?....:-) - Modshack.info 2010-02-22 16:27:40 (31 views) Well... John does weigh more than me. but besides that... it's just plain common sense - BluHeaven 2010-02-22 16:37:54 (25 views) surely he meant baby in the oven clearance. - RevisiTTed 2010-02-22 16:32:24 (26 views) I take more offense to your reply than I do steve's - BluHeaven 2010-02-22 16:37:31 (31 views) LOL... - PRIMER 2010-02-23 02:31:35 (27 views) Oh, please don't and sorry if I did. - RevisiTTed 2010-02-22 16:45:44 (24 views) No way I was going there!..........> - Modshack.info 2010-02-22 16:39:22 (61 views) Do you weigh 400 lbs? - bubba 2010-02-22 16:04:03 (30 views) No, I'm 188 - RevisiTTed 2010-02-22 16:14:00 (23 views) nah - he probably had a couple of cases of beer in "the trunk" to show what a great guy he is > - GorTT 2010-02-22 16:10:05 (74 views) zing! - meem 2010-02-22 20:50:36 (11 views) Classic. - Gokart3 *NSFW - Don't click!!!* 2010-02-22 16:36:29 (24 views) LOL...> - Modshack.info 2010-02-22 16:13:37 (63 views) cyber > - GorTT 2010-02-22 16:48:33 (47 views) Even with degrees it doesn't pay.... - Modshack.info 2010-02-22 16:56:01 (55 views) you and me both > - GorTT 2010-02-22 17:35:49 (27 views) If it's any consolation, the two architects I know are starving. - Laguna 2010-02-22 17:21:44 (21 views) and that's the ones that ARE employed! ;-) - GorTT 2010-02-22 17:36:29 (19 views) LOL! Right! - Laguna 2010-02-22 17:40:03 (15 views)
Got rack? - AvanTTix 2010-02-22 15:23:10 (277 views) Arrrg... didn't get a chance to look for the short shift part. I'm pretty sure I have it - tomorrow. - NOLA TT 2010-02-22 23:13:44 (10 views) Wanna sell your stock valence? - That damn Dan 2010-02-22 20:47:00 (15 views) wonder if thats the rack I had for sale....didn't realize you were on here! Glad it worked out for.. - rabbitgtdguy 2010-02-22 18:02:29 (23 views) It was... - AvanTTix 2010-02-23 11:58:54 (14 views) looks good. I prefer roof-mount racks :-) - nikhil 2010-02-22 16:42:31 (97 views) Me too! - Seneb 2010-02-22 17:45:12 (70 views) Maybe not on a Roadster though. - bobkay 2010-02-22 22:34:45 (10 views) Why not? I'm sure the canvas would support it. - Seneb 2010-02-22 23:17:53 (11 views) Maybe... but then there goes putting the top down... - AvanTTix 2010-02-23 12:01:31 (9 views) I recall seeing a 'vert rack that cantilevered up over the roof. Kinda cool - David_TT225QC 2010-02-23 12:02:52 (9 views) Factory Boxster rack.... - Modshack.info 2010-02-23 12:25:37 (23 views) the Lotus Elise racks are pretty cool - nikhil 2010-02-23 12:04:25 (12 views) Nice work, looks like a great solution - TT_w/CELs 2010-02-22 16:22:53 (18 views) I had one, the receiver portion being in view bugged me, ended up switching the roof rack. - oc_tt 2010-02-22 16:00:27 (28 views) It kind of does for me too... - AvanTTix 2010-02-22 16:13:18 (27 views) It's a bit easier to yank the bike off the back than the top of the car. Check all the bolts/nuts.. - oc_tt 2010-02-22 16:24:44 (23 views) Nice simple design-- looks good - ClarkSJ 2010-02-22 15:53:46 (18 views) you gotta darken the wheels, man! looks good. - \|everso!\| 2010-02-22 15:52:46 (19 views) 2 options... - AvanTTix 2010-02-22 16:21:22 (115 views) i'm not a big BBS fan....so Ultraleggeras, IMO! - \|everso!\| 2010-02-22 16:42:35 (37 views) 2nd the BBS sucks on White - DynomiteTT 2010-02-22 19:19:20 (15 views) The voice of Reason... - Mark 2010-02-22 22:34:49 (48 views) there is more wrong with that car than wheels... - TTinCT 2010-02-23 00:32:10 (11 views) reiger/PPI kit FAIL.... - DynomiteTT 2010-02-22 23:52:25 (10 views) stop your foolish attempts to dilute the truth. White is the bestest color evar!!!!! - Mark 2010-02-23 01:48:53 (10 views) Fail! - oc_tt 2010-02-22 17:28:00 (14 views) Whuuuut!? BBS is about the best looking wheel on the TT... IMO. - PGTT 2010-02-22 17:23:40 (17 views) HATER! ;-) - TTinCT 2010-02-22 17:19:58 (15 views) Paint the pipes silver and it will look like a Beetle - David_TT225QC 2010-02-22 15:43:44 (27 views) how much was it to have your gascap done? - BluHeaven 2010-02-22 15:28:54 (23 views) Free... - AvanTTix 2010-02-22 15:33:43 (77 views) Only four screws need to come out to get the gas cap off the car - JohnLZ7W 2010-02-22 16:12:31 (36 views) Or one gas station attendant. I H8 whOregon. - Gokart3 *NSFW - Don't click!!!* 2010-02-22 16:38:59 (27 views) What happened? - TCU_TT 2010-02-22 19:53:56 (25 views) And you completely forgot to reply! - Gokart3 *NSFW - Don't click!!!* 2010-02-23 01:49:34 (26 views) $600 for the calipers?...........> - Modshack.info 2010-02-22 15:40:47 (121 views) Do you use a special powder on calipers to deal with high temps? - Late_Apex 2010-02-22 15:54:50 (22 views) No......Not generally needed.....> - Modshack.info 2010-02-22 15:57:06 (48 views) Yeah I figured... - AvanTTix 2010-02-22 15:46:45 (52 views) .......Live and learn.....>> - Modshack.info 2010-02-22 15:50:44 (42 views) Maybe the 600 included removal and replacement. All four? still pricey. Diverse??? surely not! - J. Patterson 2010-02-22 15:53:36 (24 views) LOL...If I ever need dry cleaning, I'm sending it to you! - Modshack.info 2010-02-22 15:54:40 (21 views) hey steve... how much to do a gascap - BluHeaven 2010-02-22 15:42:52 (37 views) Edited above....>> - Modshack.info 2010-02-22 15:44:34 (53 views) That sounds about right Steve on the calipers...and let me tell everyone..>> - TTBlack 2010-02-22 18:35:38 (30 views) Thanks Dave...Got em on yet???? - Modshack.info 2010-02-22 19:17:48 (13 views) Ummmm...hopefully within the next few weeks..>> - TTBlack 2010-02-23 06:57:40 (13 views) Good job...but must disagree, pipes are very visible in pics and not in a good way. - TTQ2K2 2010-02-22 15:26:43 (25 views)
O2 Testing... - alms_lefko 2010-02-22 13:56:24 (148 views) Skip.....> - Modshack.info 2010-02-22 14:26:48 (88 views) Thanks> - alms_lefko 2010-02-22 14:35:33 (36 views)
Problem with my windows - Modedmoro 2010-02-22 12:39:33 (92 views) Replacing the microswitch worked for me on 2 occasions - Radio Shack switch 275-016. - MarTT 2010-02-22 16:47:32 (21 views) # noted. gotta do that on drivers door. Thanks! - J. Patterson 2010-02-22 16:53:49 (14 views) lemon it. i'm sure eightt can help you with the paperwork. - meem 2010-02-22 13:25:01 (30 views) ^^^Dick alert^^^ - EighTT 2010-02-22 17:35:56 (21 views) ROFLCOPTER!!! - Gokart3 *NSFW - Don't click!!!* 2010-02-22 13:32:44 (110 views) He He He - ParanoidTT 2010-02-22 14:12:19 (17 views) might be the door closed sensor - JohnLZ7W 2010-02-22 13:18:28 (30 views) /switch - David_TT225QC 2010-02-22 13:16:48 (28 views) when I open the door and the window goes back up - Modedmoro 2010-02-22 14:05:11 (29 views) Have you tried a full window reset? Or pulling the fuse? - siTTin preTTy 2010-02-22 14:35:22 (26 views) Probably the switch - JohnLZ7W 2010-02-22 14:23:09 (77 views) are these pictures of you fixing the problem?>>> - TTaz02 2010-02-22 14:46:00 (24 views) That dosent seem like fun! - Modedmoro 2010-02-22 14:43:27 (23 views)
alternator Update ...replacement alternator in, checked voltage drop... - Rocky-in-Connecticut 2010-02-22 12:31:45 (30 views) my understanding is anything less than .2v>>> - TTinCT 2010-02-22 12:42:49 (24 views)
I love how the manager at NTB told me not to bring my car back to them. - TCU_TT 2010-02-22 12:29:52 (182 views) Sadly, i have not found anyone who can align my TT well in dallas, For under $175 - DynomiteTT 2010-02-22 13:10:25 (28 views) they offered you your money back - that sounds pretty fair; did you tell them you'd had a mishap? - GorTT 2010-02-22 12:56:49 (28 views) Yes they knew that. - TCU_TT 2010-02-22 13:06:30 (27 views) my .08 > - GorTT 2010-02-22 13:40:33 (44 views) I'm local here in Dallas and have two sets...>>> - Room4Tu 2010-02-22 12:50:34 (49 views) What shape are your fat 5s in? Local too. - TTQ2K2 2010-02-22 12:55:51 (27 views) No bends just curb rash from previous owner. - Room4Tu 2010-02-22 13:59:04 (17 views) Oh, mine have that option too...no bends plus rash. was hoping for no rash. - TTQ2K2 2010-02-22 15:05:23 (13 views) I have fat5s that I was going to put back on when I traded it in ... not sure of their condition - MaxHedrm 2010-02-22 15:13:33 (20 views) Awesome. Let me know when. I can throw in some homebrew...it's priceless. - TTQ2K2 2010-02-22 19:20:40 (10 views) I'll try to take a look at them this week when the weather stops threatening. Stoopid Texas. - MaxHedrm 2010-02-23 02:18:56 (5 views) wait, was all this after you hit a curb or something? - JohnLZ7W 2010-02-22 12:50:20 (57 views) exactly - something else here. - GorTT 2010-02-22 12:55:19 (26 views) Will, i pmed you on vortex - DynomiteTT 2010-02-22 13:11:23 (23 views) damn; missed it - email me. - GorTT 2010-02-22 13:12:56 (20 views) They said nothing was bent or they wouldn't have been able to align it. - TCU_TT 2010-02-22 12:54:58 (35 views) Yeah, I vote for somethin bent. Given the alignment output you posted here they didn't align it - JohnLZ7W 2010-02-22 12:56:42 (25 views) I have a feeling there is something bent because now after the alignment... - TCU_TT 2010-02-22 14:17:58 (27 views) Which NTB so we dallas tt'ers can avoid? - TTQ2K2 2010-02-22 12:37:16 (43 views) Why would you want to avoid them? - JohnLZ7W 2010-02-22 13:05:50 (44 views) Because of the not vibrating before going in, but vibrating after going in. Refunding the money is - TTQ2K2 2010-02-22 15:09:05 (16 views) Well this isn't my only problem with this place. - TCU_TT 2010-02-22 13:23:03 (35 views) Off 75 between Lovers and Southwestern. - TCU_TT 2010-02-22 12:41:08 (32 views) Weird. I have good luck with them & one of the guys comes & says hi when I go. - MaxHedrm 2010-02-22 15:06:39 (13 views) I have four of them that know me and that have helped me but all of a sudden that changed. - TCU_TT 2010-02-22 15:52:09 (13 views) haha i could told you to never go for alignments.... EVER! its very disturbing that all the HP Folks - DynomiteTT 2010-02-22 13:05:09 (39 views) lol yea that is probably the last time I go there. - TCU_TT 2010-02-22 13:08:10 (23 views) Go to the one near Grapevine Mills. Guys there are car enthusiasts...>>> - Room4Tu 2010-02-22 12:46:10 (40 views) i go outta my way for alignments from boardwalk porsche in plano. - DynomiteTT 2010-02-22 13:12:38 (24 views) Yeah, heard there is a guy that does a pretty kick a$$ alignment job over there. - Room4Tu 2010-02-22 14:00:18 (18 views) Grapevine was where I was planning to go for my alignment, but panicked with OP. - TTQ2K2 2010-02-22 13:02:34 (29 views)
Hello, does anybody have a spare jack for my '01 roadster.... - LouisR 2010-02-22 11:48:09 (57 views) To summarize the below: Get a Honda scissor jack from eBay. the OEM jack = deadly - brillianTT 2010-02-22 13:13:45 (31 views) LOL.... thanks for summarizing this thread....to eBay I go - LouisR 2010-02-22 17:31:19 (17 views) Good Choice - TTransport 2010-02-22 23:44:51 (10 views) You don't want one of those things... They're evil. Seriously. - AxeYrCat 2010-02-22 12:04:53 (146 views) so true! > - GorTT 2010-02-22 12:09:19 (72 views) yep...same here - TTinCT 2010-02-22 12:30:01 (34 views) what are you supposed to use on the side of the road, then? AAA? - Mark 2010-02-22 12:22:22 (36 views) Forget the jack -> Call for a FlatBed... I don't carry a spare - TTransport 2010-02-22 13:11:07 (28 views) That's rediculous - Scenic Driver 2010-02-22 13:44:27 (26 views) needs to be a full-size spare on extra rim to clear brakes - not ridiculous. - GorTT 2010-02-22 13:46:14 (23 views) As general advice it is >> - Scenic Driver 2010-02-22 14:18:53 (42 views) Well, there in lies the problem>>> - TTinCT 2010-02-22 16:16:51 (32 views) which brakes? - JohnLZ7W 2010-02-22 13:47:40 (21 views) his stoptechs, but I suppose you could rotate tires if you needed to > - GorTT 2010-02-22 13:48:49 (28 views) Must be 355s, the spare barely clears my 328s. - JohnLZ7W 2010-02-22 13:50:17 (19 views) yep; he's got the big kit. - GorTT 2010-02-22 13:51:30 (19 views) 355 Kit correct, but a Roadster doesn't leave alot of space for a full size spare... - TTransport 2010-02-22 23:54:04 (20 views) yeah - I forgot about all that shit you put in there... - GorTT 2010-02-23 00:24:01 (8 views) Like Beer....:-) - Modshack.info 2010-02-23 10:20:23 (9 views) that's his custom mister... - GorTT 2010-02-23 10:59:44 (8 views) ditto. - GorTT 2010-02-22 13:13:48 (23 views) These don't take up much space - JohnLZ7W 2010-02-22 13:01:50 (91 views) Second that - TCU_TT 2010-02-22 12:31:25 (60 views) Maybe there should be a recall on your drivers license based on your post above - BlewChip 2010-02-22 12:36:47 (32 views) Yea since my past job had me driving in parts of Dallas where they don't care about the roads - TCU_TT 2010-02-22 12:48:34 (45 views) they dont care about roads anywhere in dallas imo. - DynomiteTT 2010-02-22 13:16:52 (23 views) true true. Like down Greenville towards Ross. - TCU_TT 2010-02-22 13:25:44 (24 views) better tire replacement schedule? - GorTT 2010-02-22 12:52:57 (28 views) My tires are pretty new. - TCU_TT 2010-02-22 13:13:58 (30 views) but a sissor jack like the ones found in most honda/toy/maz.. better than widow maker. - TTQ2K2 2010-02-22 12:31:16 (30 views) Yup....they're a pretty decent jack......> - Modshack.info 2010-02-22 13:05:51 (90 views) That's a fact Jack! - TTBlack 2010-02-22 12:26:57 (30 views)
ok,sans the "outhouse" LOL - ITTALSKIER 2010-02-22 11:16:31 (174 views) You know, a better shot would have been...>> - RoberTT 2010-02-22 13:07:55 (35 views) That's what I'm talking about - TTBlack 2010-02-22 13:25:00 (8 views) Yeah, everyone was oohing and aaahing...>> - RoberTT 2010-02-22 13:29:31 (11 views) Yeah, Gregg made a remark as we came back..>> - TTBlack 2010-02-22 14:47:27 (13 views) Going great! Got family plans this year. Slipped out last year...>> - RoberTT 2010-02-22 15:20:19 (8 views) I like it.....maybe the submission for QW home page.....;-) - TTinCT 2010-02-22 11:43:39 (11 views) Wait...is there a passenger in that car? - TTBlack 2010-02-22 11:59:16 (9 views) could have been....there were a couple!!!! >> - TTinCT 2010-02-22 12:00:38 (20 views) Only one in the wild ride! - TTBlack 2010-02-22 12:30:07 (21 views) Sure Dave....whatever i can do to help>>> - TTinCT 2010-02-22 12:33:35 (18 views) Chemical strip would be the best way... - Modshack.info 2010-02-22 13:08:04 (11 views) Something like Strip-eze Steve?..>> - TTBlack 2010-02-22 13:27:55 (10 views) Never used it but...> - Modshack.info 2010-02-22 13:36:35 (17 views) Steve, Can you ceramic coat stuff with your setup? >> - RoberTT 2010-02-22 15:25:06 (7 views) Expensive and labor intensive....> - Modshack.info 2010-02-22 15:33:43 (11 views) Gotcha. Just a thought. - RoberTT 2010-02-22 15:39:25 (4 views) Actually Mike Caswell is a good friend of mine..>> - TTBlack 2010-02-22 14:42:48 (8 views) Cool! - Modshack.info 2010-02-22 14:44:28 (8 views) LOL....so where's Hans now?....:-) - Modshack.info 2010-02-22 11:33:58 (14 views)
Quick pic from this morning, need to post-process it but have to head to work now - JohnLZ7W 2010-02-22 11:09:20 (154 views) Sell it. - PGTT 2010-02-22 13:28:46 (6 views) oh wow.... you weren't kidding - BluHeaven 2010-02-22 12:51:13 (10 views) I thought it'd be an engine mount. ;-) - Gokart3 *NSFW - Don't click!!!* 2010-02-22 11:33:00 (21 views) beautiful - minibabe 2010-02-22 11:14:55 (13 views) +1 - TTQ2K2 2010-02-22 11:20:59 (9 views)
Hey all....are there any good Audi shops in Hawaii that anyone knows of - OWDYTT 2010-02-22 09:51:13 (20 views) ask ZZ CETT, you'll find him on the other "other forum"... 2 audis, lives in Hilo - Russ Scott 2010-02-22 15:27:37 (7 views) I assume you mean besides stopping in at the Harley dealer... - kappa-q 2010-02-22 11:34:28 (11 views) I just hate you for asking that....Man I wish I was somewhere warm right now :) - minibabe 2010-02-22 10:23:22 (14 views)
Morning.........A parade of mellow - ITTALSKIER 2010-02-22 09:00:57 (132 views) Love your reflection in hubcap! - SMOOTTH DON 2010-02-22 10:34:00 (8 views)
Quattro Anniversary? Front... nice. Rear... "Ur" ugly!! (IMHO) - NOLA TT 2010-02-22 00:08:38 (234 views) Not a fan of front (to busy) or rear (to dull) . They have time to fix....hopefully. - TTQ2K2 2010-02-22 10:53:21 (8 views) That is NOT an Audi rendering. It's someone's bad interpretation... in fact, it's hideous. - PGTT 2010-02-22 13:24:35 (30 views) sell it - ITTALSKIER 2010-02-22 08:55:09 (12 views) That's a beyond bad rendering from last August. If anything, it will be based on the new RS5. - PGTT 2010-02-22 08:17:00 (89 views) Yum. - Seneb 2010-02-22 11:40:20 (7 views) Can I have one please? - TCU_TT 2010-02-22 10:01:15 (9 views) That is MUCH better - TTinCT 2010-02-22 08:47:32 (14 views) I like it. The "Z" LEDs need to go, though - as350 2010-02-22 07:16:51 (13 views) Needs a wing, happening... if Audi's purist, no. - RSpdstr 2010-02-22 01:28:05 (17 views) If I had money I'd buy one. - DumpTTruck 2010-02-22 00:57:51 (16 views) front looks like an evo X and rear like a prius! - debashis 2010-02-22 00:34:13 (32 views) I like the whole thing. Very nice. A tough looking AUDI. - J. Patterson 2010-02-22 00:19:54 (21 views) I don't hate it at all. - AxeYrCat 2010-02-22 00:16:59 (20 views)
Just bought a Votex rear skirt (flame suit on) -- I have some plans to fix the ugliness... - NOLA TT 2010-02-21 23:20:38 (184 views) I did the same rear and sides for $70 and reasonable shipping. I got the front there too for 285. - kingfishgrapejam 2010-02-23 03:43:00 (6 views) Does anyone still have the Votex fronts? - oc_tt 2010-02-22 07:59:50 (11 views) Dealer maybe. - TTQ2K2 2010-02-22 12:38:53 (7 views) I have the same question... I noticed that the front is not discounted as a single piece - Felino Perdido - TT 2010-02-22 11:27:27 (11 views) It's not discounted because people liked it, other pieces were low sellers. - blackfnTTruck 2010-02-22 12:17:26 (5 views) it will always look tacked on, because it is. shame on audi for releasing such a horrible kit. - meem 2010-02-22 01:28:02 (11 views) what are your ideas for fixing it? - TTwizted13StrtRcr 2010-02-21 23:45:25 (16 views) I'm going to paint the bottom piece above the tailpipes black, and experiment w/ the grill >> - NOLA TT 2010-02-21 23:58:32 (32 views) Good luck! - AxeYrCat 2010-02-21 23:31:31 (14 views)
Well... finally replaced my flat tire. Wanna see something scary? - NOLA TT 2010-02-21 22:59:43 (217 views) Assume that's the inner edge corded since you did not see it.--------- - J. Patterson 2010-02-22 00:16:13 (33 views) Yes... the inner. Toe was 2 deg off! Steering wheel was straight. Pressure was 36-40. - NOLA TT 2010-02-22 00:25:51 (19 views) Let that be a lesson to all: Eyeball your tires once a month. - sTTevo 2010-02-21 23:45:57 (20 views) Much more often if ECS wrenches on your car (don't even think they do that anymore). - AxeYrCat 2010-02-21 23:48:32 (20 views) After ECS "did" an "alignment" on my car, I ended up like that after ~1k. - AxeYrCat 2010-02-21 23:15:05 (42 views) 1K? That is scary!! - NOLA TT 2010-02-21 23:21:36 (21 views) There are a number of reasons I'm not a fan of that place. That's one. - AxeYrCat 2010-02-21 23:23:51 (51 views) I know what you mean... but not that new! - NOLA TT 2010-02-21 23:28:37 (19 views) Vince...you best thank your Guardian Angel... - Gomez 2010-02-21 23:06:50 (33 views) Yep! You never know... those tires were less than a year old! - NOLA TT 2010-02-21 23:11:40 (20 views)
LOST MY KEYS!!! - bvnguyen516 2010-02-21 21:39:18 (111 views) Call the dealer. File a claim with your insurance company for one of the missing keys. - bubba 2010-02-22 10:20:19 (9 views) I would get the plastic key back from the ex. - TCU_TT 2010-02-22 00:28:23 (30 views) No need to replace the locks....>> - Modshack.info 2010-02-21 21:58:39 (102 views) steve! - bvnguyen516 2010-02-21 22:02:28 (75 views) Well.....I confess I've lost a few......> - Modshack.info 2010-02-21 22:09:48 (68 views) so price guesstimate to get 2 new key fobs? - bvnguyen516 2010-02-21 22:16:39 (20 views) 6yrs ago, no clue......Check Ebay.. - Modshack.info 2010-02-21 22:24:17 (17 views) that quote is actually cheap given than my dealer charges $300 per key - brillianTT 2010-02-21 21:54:43 (23 views) yeah but.. - bvnguyen516 2010-02-21 22:04:13 (49 views)
A couple of modding questions for you guys. - NY_TT8 2010-02-21 21:39:11 (97 views) my input - bvnguyen516 2010-02-21 21:51:02 (51 views) random pics - bvnguyen516 2010-02-21 21:59:51 (103 views) Headlights are easy - BluHeaven 2010-02-21 21:45:08 (56 views) you have a different definition of "easy" than i do. can it be done quickly if you've done ... - meem 2010-02-21 22:10:36 (53 views) lol - bubba 2010-02-22 16:02:20 (7 views) It's involved, for sure, but it's not difficult. =) - AxeYrCat 2010-02-21 23:16:21 (15 views) that could be said of the vast majority of automotive tasks. - meem 2010-02-21 23:17:51 (13 views) True. But this one, while having many steps, is pretty hard to screw up, I think. - AxeYrCat 2010-02-21 23:22:41 (29 views) My headlights are still not flush with the bumper on both interior sides, and I tried and tried and - Mark 2010-02-22 02:01:44 (25 views) no ones headlights are flush all the way around. - BluHeaven 2010-02-22 02:06:31 (13 views) ORLY? - Mark 2010-02-22 02:10:59 (11 views) yarly. mine weren't flush stock from the factory IIRC - BluHeaven 2010-02-22 02:12:47 (11 views) indeed -- it is straightforward -- though putting back on the bumper without a helper can lead to .. - meem 2010-02-21 23:27:07 (32 views) [Insert inappropriate joke about "easy" and "done in under 30 minutes" here.] =D - AxeYrCat 2010-02-21 23:30:28 (16 views) ive been in different cars with coil overs and they feel to bouncy - NY_TT8 2010-02-21 21:51:08 (22 views) there bouncy because mis-use > - TTwizted13StrtRcr 2010-02-21 23:50:07 (26 views) slammed cars? non audi/vw? cheap coilovers? - BluHeaven 2010-02-21 22:04:16 (40 views) Not if matched to the car.....>> - Modshack.info 2010-02-21 22:03:40 (43 views)
Increasing remote range....the battery isn't weak/dead... - rabbitgtdguy 2010-02-21 21:36:06 (57 views) Raise the remote one arm above your head, 100 FT increase in range - VuTT 2010-03-06 12:15:19 (1 view) Press your keyfob to your chin and then press the button. No idea why, but it works. - Serenitty 2010-02-22 12:52:58 (13 views) I think the premise for this method is to use your body as an amplifier for the transmitter... - sharkaTT 2010-02-22 16:34:54 (8 views) It's fun to be an antenna head... - Serenitty 2010-02-23 10:56:31 (2 views) wow, 30 feet is farther than I have ever gotten it to work - brillianTT 2010-02-21 21:57:19 (14 views) here is the MKIV version of the mod... - rabbitgtdguy 2010-02-21 21:50:10 (50 views)
First experiement with Dry-Noc carbon material...homemade wheel caps... - rabbitgtdguy 2010-02-21 20:49:52 (205 views) Looks good! - Gokart3 *NSFW - Don't click!!!* 2010-02-22 11:34:11 (11 views) fwiw the "carbon" caps on authentic lm's are plastic garbage. what you have is much better. - meem 2010-02-21 21:20:40 (26 views) Thanks...the "look" is what I was thinking off...I remember buying caps from BBS for a set of MK2 - rabbitgtdguy 2010-02-21 21:23:15 (28 views) if only i'd known you were looking for a set ;-) - meem 2010-02-21 21:27:29 (143 views) Nicely organized... as usual. - Gokart3 *NSFW - Don't click!!!* 2010-02-22 11:35:02 (10 views) I am - all the tabs on the back of the caps snapped off when I removed them for track day - rasTTa 2010-02-22 08:42:29 (16 views) you're talking about the ch caps, right? different size. - meem 2010-02-22 12:58:28 (9 views) yup - damn tabs - rasTTa 2010-02-22 17:15:34 (6 views) How many label makers have you gone through? - AchTTung-Vollgas 2010-02-22 00:44:43 (15 views) this rabbit hole just keeps getting deeper and deeper - ttempted 2010-02-21 22:38:58 (18 views) someday I want a tour of your garage, no joke. - brillianTT 2010-02-21 21:58:52 (16 views) Oh man! Now thats a collection...wow. - rabbitgtdguy 2010-02-21 21:30:03 (12 views) Like :thumbsup: - The Chad 2010-02-21 21:12:46 (16 views) It's really nice stuff isn't it? - BluHeaven 2010-02-21 21:12:23 (38 views) its AWESOME stuff..going to buy more ... remeasured...caps are 2- 9/16" in diameter!!! - rabbitgtdguy 2010-02-21 21:21:04 (31 views) Damn... my rings are 2.5" long. Sorry :( - BluHeaven 2010-02-21 21:42:25 (16 views) Correction...I was totally off (going off eyeing it during the hockey game)....they are 2- 9/16" ... - rabbitgtdguy 2010-02-21 22:22:20 (16 views) let me break out the calipers and get an exact measurement. - BluHeaven 2010-02-21 22:26:16 (14 views) Awesome... :) factory audi ones would be great... they'd be a raised tin piece too I think... - rabbitgtdguy 2010-02-21 22:29:29 (11 views) The rings are 2-17/32 exactly... That'd be a super tight fit.... edge to edge - BluHeaven 2010-02-21 22:33:10 (16 views) I could give it a try and see...wouldn't hurt... - rabbitgtdguy 2010-02-21 22:47:47 (14 views) hmm...too bad I couldn't find a quattro gekko die cut, or similar....that'd be different... - rabbitgtdguy 2010-02-21 22:53:07 (16 views) For those looking for a source....>> - Modshack.info 2010-02-21 21:23:51 (52 views) Steve, that is a great site...super service too guys. Ordered early last week...paid 8 bux for the - rabbitgtdguy 2010-02-21 21:25:19 (24 views) Excelent.....I may try this for a VTDA wrap since I no longer do real carbon.....> - Modshack.info 2010-02-21 21:35:59 (26 views) dunno about replicas, but the factory bbs cap is 56mm - meem 2010-02-21 21:23:07 (23 views)
OEM 3 bar grill w/ rings and OEM 3.2 rear valance sold to AvanTTix :) - BluHeaven 2010-02-21 20:44:49 (74 views) Mine mine mine!!! - AvanTTix 2010-02-21 20:52:00 (32 views) Anyone have a OEM 3 bar grill and/or OEM 3.2 rear valence for sale?? - VelveTTrevolvr 2010-02-22 00:22:56 (12 views) And I will have a 3.2 valence as soon as I find a stock, white, 225 version to replace it with. - That damn Dan 2010-02-22 22:14:09 (8 views) You can have mine once I get the 3.2l... - AvanTTix 2010-02-23 12:11:41 (4 views) ygm - VelveTTrevolvr 2010-02-23 01:21:06 (5 views) I have a 3 bar grille, just took it off, with rings - blackfnTTruck 2010-02-22 12:30:17 (14 views) ygm - VelveTTrevolvr 2010-02-23 01:21:25 (5 views)
A reminder to Roadster owners: - AxeYrCat 2010-02-21 20:41:33 (115 views) Do you have a for sale post anywhere? - alms_TT_ny 2010-02-22 13:21:46 (7 views) I wish I had the $$$ then I could make one a dedicated track car :) Someone should jump on yours - TTransport 2010-02-21 21:33:36 (13 views) Engine swap? :) - DynomiteTT 2010-02-21 20:42:51 (12 views) Buy the car and do whatever you want with it! - AxeYrCat 2010-02-21 20:45:58 (32 views) i know i just dont have room for 2 TTs! - DynomiteTT 2010-02-21 20:47:06 (13 views)
PSA: "BULLITT" on blu-ray 9.99 at best buy. - donsTT 2010-02-21 20:40:47 (15 views) Tks! I'll have to pick one up. - Gokart3 *NSFW - Don't click!!!* 2010-02-22 11:35:39 (3 views)
[OT] Any cyclists have a take-off saddle or one otherwise gathering dust? - AxeYrCat 2010-02-21 20:39:14 (38 views) I have two of these Setty Lynx and really like em... - Seneb 2010-02-22 13:33:37 (7 views) I've got these - rasTTa 2010-02-22 08:41:22 (32 views) WTB Rocket V - SparTTan 2010-02-21 22:44:25 (11 views) Seems rather reasonably priced here... - AxeYrCat 2010-02-21 23:25:15 (13 views) Yeah, depends on how much you care about weight - SparTTan 2010-02-22 09:03:39 (12 views) Not gonna lie, Rich... - AxeYrCat 2010-02-21 23:13:25 (24 views) HAHA, oops! That never even occurred to me. - SparTTan 2010-02-22 08:55:20 (10 views) I've several Fiziks, like 'em all - TimTi 2010-02-21 21:50:50 (8 views) Want to sell one for less than $50? =O - AxeYrCat 2010-02-21 21:56:46 (6 views) find a used selle italia flite on ebay - alms_TT_ny 2010-02-21 21:02:30 (9 views) Bid on one... Unlikely to win, but hey... - AxeYrCat 2010-02-21 22:00:30 (9 views) Ended up spending more than I wanted, but picked up a Selle Italia Flite Carbonio. - AxeYrCat 2010-02-22 16:49:16 (11 views)
I'm tired of seeing this... as many times as I've opened them up, maybe I need new ones. - NOLA TT 2010-02-21 20:29:56 (204 views) Yikes! That convinces me to never open them up...I'll live with the OEM reflectors. - Black BeauTTy 2010-02-21 22:21:44 (19 views) Those were opened at least 6 or 8 times... and the last time, I removed the sealing putty >> - NOLA TT 2010-02-21 22:49:22 (19 views) they actually are NOT sealed airtight > - GorTT 2010-02-21 22:42:50 (32 views) YES... something else! In fact... maybe I sealed it all the way. That just might be the problem! - NOLA TT 2010-02-21 22:51:00 (13 views) hard to do - the lights kind of keep that from happening > - GorTT 2010-02-22 01:59:39 (21 views) Well, the car had been sitting up for a couple of weeks. After driving it today, the lens dried up. - NOLA TT 2010-02-22 23:02:45 (4 views) i wouldn't let that stop you. many of us have had them open and don't have any fogging issues. - meem 2010-02-21 22:38:19 (16 views) That's not fog, that's friggin rain! - TTQ2K2 2010-02-21 22:43:37 (18 views) wow, sorry, that's bag-over-the-head-while-driving bad - meem 2010-02-21 21:51:28 (18 views) I know... with the temp changes at this time of the year, it's been bad :-/ - NOLA TT 2010-02-21 21:54:34 (13 views) ouch, thats bad... mine fogs up from time to time too, but not that bad. :/ - DynomiteTT 2010-02-21 20:42:03 (19 views) look at the 'bright' side - you could start a science project in there! ;-) - GorTT 2010-02-21 20:36:27 (18 views) Yeah... maybe I'll add a shrub or two. - NOLA TT 2010-02-21 20:42:11 (20 views) a small herbarium; how green! ;-) - GorTT 2010-02-21 20:59:46 (14 views) I think your problem is that you're sealing them in NOLA... - AxeYrCat 2010-02-21 20:33:34 (46 views) Looks like you need the Corps of Engineers to put a levee around your HLs. - SlapTTy 2010-02-22 09:10:42 (9 views) haha... true! the humidity is killer here. - NOLA TT 2010-02-21 20:34:54 (23 views)
Who was it that was looking for aliens near me... Brandon was that you???? - BluHeaven 2010-02-21 20:00:29 (44 views) yep it was. I really just need the nozzles though but if you are tossing junk then - PRIMER 2010-02-22 01:18:18 (16 views) Come pick them up whenever. They're taking up space in the attic. As payment - BluHeaven 2010-02-22 02:09:25 (24 views) SWEET! sounds good. Why can you - PRIMER 2010-02-22 02:13:12 (26 views) cause of the medical conditions - BluHeaven 2010-02-22 02:14:03 (23 views) oh, didn't know that. that really sucks because Kemper is the best EVER!!! - PRIMER 2010-02-22 02:24:00 (10 views) I know!!! :( - BluHeaven 2010-02-22 02:25:31 (12 views) Wow hard to imagine someone wanting to put them back in - TTransport 2010-02-21 20:27:24 (20 views) some of us like the concept of all the factory features working :-) - meem 2010-02-21 21:24:11 (20 views) Understood, I miss my heated seats :( - TTransport 2010-02-21 21:31:08 (18 views) Mine work great. =D - AxeYrCat 2010-02-21 22:05:21 (16 views) which brand heating pads did you go with? - meem 2010-02-21 22:08:06 (13 views) I thought you knew: Audi. - AxeYrCat 2010-02-21 22:28:35 (14 views) transplanted? - meem 2010-02-21 22:38:47 (11 views) No. Impossible to remove from the factory seats. - AxeYrCat 2010-02-21 23:11:56* (24 views) the bigger problem is tracking down appropriately-sized heating pads. - meem 2010-02-21 23:18:30 (11 views) Oh, that's right. There was something about the sizing of the Recaros, right? - AxeYrCat 2010-02-21 23:20:17 (11 views) yes -- and you really need three heating elements rather than two. i don't know anyone ... - meem 2010-02-21 23:23:59 (19 views) Interesting... Why three? The factory wiring only makes provisions for the two, IIRC. - AxeYrCat 2010-02-21 23:28:07 (19 views) seat bottom, lower back and upper back... It's what's always been missing from our seats... - Mark 2010-02-22 01:51:07 (11 views) actually, the back is one piece on the pole positions; it's the seat bottom that's two pieces. - meem 2010-02-22 01:53:54 (13 views) Are you just messing with me or did you retrofit your recaros with a heated setup? - TTransport 2010-02-21 22:07:57 (15 views) My Sparcos. Yes. Absolutely, I did. - AxeYrCat 2010-02-21 22:29:02 (12 views) yeah i'd like to get mine working again as well. - meem 2010-02-21 21:50:25 (13 views)
After removing the trunk rings, here's some potentially more "controversial" mods... - AvanTTix 2010-02-21 19:55:00 (203 views) You'll eventually want the original back. Easy to clean now you've removed it. - sTTevo 2010-02-21 23:58:38 (27 views) gack. - Lowcountry 2010-02-21 22:33:43 (28 views) It's aluminum. Not silver / chrome. The only chrome on the TT is the logos. - MaxHedrm 2010-02-21 21:29:13 (17 views) You sure you like that shift boot? Just doesn't look right. Undecided about the gas cap. - oc_tt 2010-02-21 20:03:55 (22 views) I do... - AvanTTix 2010-02-21 20:11:17 (41 views) Here's a couple of pics of the set-up w/ the stock knob... - AvanTTix 2010-02-21 20:47:10 (92 views) sorry but the rubber rings are better,and fit the design scheme........ - ITTALSKIER 2010-02-22 00:11:15 (15 views) Looks better, but still just doesn't seem to fit the design of the interior IMO. - oc_tt 2010-02-21 21:38:20 (13 views) +1. OEM is best look. - TTQ2K2 2010-02-21 22:42:25 (11 views) can't say i care for the shaved scrotum, but the gas cap looks to work well with the black top. - meem 2010-02-21 20:00:13 (26 views) oh, well balls... - PRIMER 2010-02-22 01:21:26 (11 views) heh, heh, heh... :o) - Mark 2010-02-21 20:03:47 (19 views)
Didn't this older model DG short shift kit also come with a side to side? - NOLA TT 2010-02-21 19:48:42 (119 views) Forge makes a set of fully adjustable throw and side to side replacement pieces - rasTTa 2010-02-22 11:46:07 (14 views) That's what I have now ;-) - NOLA TT 2010-02-22 23:04:01 (3 views) Well, when I bought it slightly used, it had another piece, but looked like the OEM... - NOLA TT 2010-02-21 20:24:50 (24 views) The original was composed of modified OEM parts at least from looking at mine - TTransport 2010-02-21 20:26:29 (18 views) Thanks... that must be what I have, I'll check my parts again. - NOLA TT 2010-02-21 20:34:03 (11 views) ECS sells a replacement, for that part but not cheap...>> - Modshack.info 2010-02-21 20:41:27 (25 views) LOL - just realized that's the Forge piece - rasTTa 2010-02-22 20:30:09 (4 views) Hmmm... I think I have that piece somewhere. - NOLA TT 2010-02-21 20:43:36 (8 views) yup - BluHeaven 2010-02-21 19:57:18 (13 views) As I recall....>> - Modshack.info 2010-02-21 19:57:00 (82 views) I've got the original race... - TTransport 2010-02-21 20:06:38 (32 views) Ah...Ok then! - Modshack.info 2010-02-21 20:10:18 (10 views)
My $900 service... - AvanTTix 2010-02-21 19:21:25 (142 views) rubber gromet - Tresser4K 2010-02-21 21:07:24 (19 views) that reminds me that I need to replace my valve cover gasket :( - nikhil 2010-02-21 20:22:57 (8 views) Why the Cam Tensioner? - TTransport 2010-02-21 20:09:12 (13 views) The gasket was leaking. - AvanTTix 2010-02-21 20:13:19 (9 views)
Hey Mr Modshack! question about flange mount. - BluHeaven 2010-02-21 19:03:58 (105 views) Misread...10mm nut will do it..as Tony pointed out.. - Modshack.info 2010-02-21 19:14:49 (7 views) IIRC it is a 10mm nut w/ 6mm thread - Blue TTop 2010-02-21 19:06:45 (12 views)
Any idea where I can find JUST ONE of these rims?? - NY_TT8 2010-02-21 18:57:22 (52 views) Its gonna be so hard I had the same issue although a different rim I have been searching for months - OWDYTT 2010-02-22 08:47:31 (5 views) One of what rims? - MaxHedrm 2010-02-21 21:33:43 (7 views) 19X8 5-100 ET35 MSW TYPE 16 - NY_TT8 2010-02-25 10:24:22 (2 views)
window pop mechanism? - bvnguyen516 2010-02-21 18:42:03 (38 views) Here's a thought... - Gomez 2010-02-21 19:13:32 (24 views) im hoping this is the "solution".. - bvnguyen516 2010-02-21 21:34:44 (13 views) does the drivers side? - JustJeff 2010-02-21 18:46:47 (15 views) my drivers side does do this action - bvnguyen516 2010-02-21 21:33:27 (10 views)
added this to that header blog..... - ITTALSKIER 2010-02-21 18:38:33 (144 views) Over processed IMHO. But nice shot. - MaxHedrm 2010-02-21 21:34:35 (9 views) but ITS the look I wanted......;-) - ITTALSKIER 2010-02-21 21:47:10 (5 views) TY - ITTALSKIER 2010-02-21 21:45:05 (5 views) Gotta roll windows down in the rain! - oc_tt 2010-02-21 20:05:13 (10 views) Nice...we shall call it "TT with Cones and Outhouse".....:-) - Modshack.info 2010-02-21 19:37:14 (9 views) thought it was a supply shed....... ;-) - ITTALSKIER 2010-02-21 21:45:57 (8 views) Outhouse seemed more approprite with Hans in the picture....:-) - Modshack.info 2010-02-21 21:48:58 (8 views) Nice! The only thing that car is missing is some StopTechs ;-) - Blue TTop 2010-02-21 18:51:00 (12 views) ZING!!!! >> - TTinCT 2010-02-22 12:58:29 (4 views) No zing intended! :-) - Blue TTop 2010-02-22 13:40:26 (2 views) hey!!!.....LOL - ITTALSKIER 2010-02-21 18:59:45 (7 views)
New BFI mounts in, very nice parts. 034 out, not so nice - JohnLZ7W 2010-02-21 17:55:05 (29 views) What problems did you have with the 034 mounts? - ClarkSJ 2010-02-22 15:57:42 (4 views) Took them out this weekend, after 2yrs in the car they were noticably softer - JohnLZ7W 2010-02-22 15:59:23 (7 views) I have the 034 track density mounts in. i have to say i love them. but i want nvh. :-) - ArTT Vandelay 2010-02-21 20:08:09 (11 views) hope they hold up better than the street density mounts - JohnLZ7W 2010-02-21 22:05:30 (9 views) glad to hear you got yours in too. It'll be interesting to compare how we feel about first drive.... - rabbitgtdguy 2010-02-21 18:07:55 (27 views) did you add the BFI dogbone too? - nikhil 2010-02-21 18:36:47 (18 views) Nope, still have my original energy suspension dogbone, probably 100k miles on it now :) - JohnLZ7W 2010-02-21 19:02:30 (16 views) Poly is forevah... - Modshack.info 2010-02-21 20:22:59 (11 views) Already driven it about 30 miles - JohnLZ7W 2010-02-21 18:19:33 (32 views) Sounds good - since my DP isn't hitting anymore i'm leaving well enough alone... - rasTTa 2010-02-21 19:18:21 (21 views) No adjustment available, it's a completely fixed setup. - JohnLZ7W 2010-02-21 19:23:02 (45 views) that was one bit of a bummer that I saw...but I believe the manual said 10-13mm clearance between... - rabbitgtdguy 2010-02-21 20:24:15 (18 views) You have some DP adjustment at the turbo but that is about it. - rasTTa 2010-02-22 11:48:27 (4 views)
Is there a trick to releasing the hoses and electrical connection from the secondary air pump - TTQ2K2 2010-02-21 17:47:18 (20 views) In my case they were broken both elec and the hose so no trick that I'm aware of. - TTransport 2010-02-21 20:24:01 (8 views)

Page: <<< | 1 | ... | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | ... | 20 | ... | >>>

7422 threads in 149 pages

You must be registered and logged in to post. Please select an option:

List of Supporters!	©2009 QuattroWorld - All rights reserved By using this site you are agreeing to QuattroWorld's Terms of Use and Privacy Policy	Powered by Kawf

The QuattroWorld website is not affiliated with or endorsed by Audi AG or Audi of America, Inc. Audi^TM, Quattro^TM, Avant, Tiptronic, FrontTrak, A2, A3, A4, A6, A8, S3, S4, S6, S8, TT, TT-S, R8, RS4, RS 6, Q7, Q5 and allroad quattro are trademarks of Audi AG.